Ks0422 keyestudio micro:bit PIR Motion Module

keyestudio PIR Motion Module For BBC micro:bit

Description

This keyestudio PIR motion module is fully compatible with micro:bit control board.
It is mainly composed of a digital pyroelectric infrared sensor, which is a digital signal output device.
This sensor has built-in filters, strong anti-interference, low voltage and micro power consumption.
The detection distance of the module is 3-5 meters.
The detection angle in the horizontal direction is less than 80°; the detection angle in the vertical direction is less than 55°
There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are separately connected. G for ground; V for 3V; S for signal pin(0 1 2).
When using, connect the module to micro:bit control board using Crocodile clip line.
Once detecting someone moving nearby, the signal pin of micro:bit main board will input HIGH level; LED on the module lights.

Technical Parameters

• Working voltage: DC 3.0-3.3V
• Working current: 100mA
• Maximum power: 0.5W
• Output signal: digital signal
• Detection distance: 3-5 meters
• Detection angle: less than 80°in the horizontal direction and less than 55° in the vertical direction
• Operating temperature range: -30℃~ +80℃
• Dimensions: 31mm*27mm*6mm
• Weight: 2g
• Environmental attributes: ROHS

Connection Diagram

Source Code

Example Result

Connect well the module, then send the source code to the micro:bit main board.
When detecting someone moving nearby, the LED matrix on the micro:bit main board will show a heart shape icon, and led on the PIR module lights. Or else, it will show another image and led turns off.

Resources

• Download relevant datasheet and code:

https://fs.keyestudio.com/KS0422

• BBC micro:bit website
  
• Micro:bit MakeCode Block Editor
  
• Meet micro:bit starter programming
  
• BBC micro:bit Features Guide
  
• BBC micro:bit Safety Warnings
  
• BBC micro:bit Quick Start Guide
  
• BBC micro:bit Pins

Get One Now

• Shop on aliexpress

• Official website