KS0509 Keyestudio Mega 2560 Smart Development Board: Difference between revisions
Keyestudio (talk | contribs) |
Keyestudio (talk | contribs) |
||
| Line 8: | Line 8: | ||
<br>The core processor of this development board is ATMEGA2560-16AU, together with the chip CP 2102 equipped it can serve as a UART - to - USB converter.<br> | <br>The core processor of this development board is ATMEGA2560-16AU, together with the chip CP 2102 equipped it can serve as a UART - to - USB converter.<br> | ||
<br>It boasts 54 digital I/O ports (12 designed for motors) of which 15 can be used an PWM output (4 for motors), 16 analog input ports, 4-channel serial communication ports (port 0 is for program burning), 16MHz quartz crystal, a USB interface , a power jack, a ICSP plug and a reset button. It supports all functions as a microcontroller. And connecting it to a computer with a USB cable, and powering it up through the external power (BAT power supply: DC 7-12V) are all needed to start using it.<br> | <br>It boasts 54 digital I/O ports (12 designed for motors) of which 15 can be used an PWM output (4 for motors), 16 analog input ports, 4-channel serial communication ports (port 0 is for program burning), 16MHz quartz crystal, a USB interface , a power jack, a ICSP plug and a reset button. It supports all functions as a microcontroller. And connecting it to a computer with a USB cable, and powering it up through the external power (BAT power supply: DC 7-12V) are all needed to start using it.<br> | ||
<br>[[File:KS0509-03.png|500px|frameless|thumb]] | <br>[[File:KS0509-03.png|500px|frameless|thumb]] | ||
[[File:KS0509-04.png|500px|frameless|thumb]]<br> | |||
== Instructions == | == Instructions == | ||
Revision as of 10:17, 3 June 2021
Description
The core processor of this MEGA 2560 Smart development board is TMEGA2560-16AU which is compatible with the Arduino MEGA 2650 development board. Integrated with 2 TB6612 motor driving chips, this processor can be served as the solution to drive the 4WD Smart car .
In addition, the output power supply of this board can reach the maximum 5V 3A, in 3 channels (good heat dissipation).Through 2.54mm pins, most of the GPIO ports are extend out to facilitate external connection of sensors/ modules.
Specifications
The core processor of this development board is ATMEGA2560-16AU, together with the chip CP 2102 equipped it can serve as a UART - to - USB converter.
It boasts 54 digital I/O ports (12 designed for motors) of which 15 can be used an PWM output (4 for motors), 16 analog input ports, 4-channel serial communication ports (port 0 is for program burning), 16MHz quartz crystal, a USB interface , a power jack, a ICSP plug and a reset button. It supports all functions as a microcontroller. And connecting it to a computer with a USB cable, and powering it up through the external power (BAT power supply: DC 7-12V) are all needed to start using it.
