Ks0257 keyestudio 2.8 Inch TFT LCD Shield: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
Line 6: Line 6:


==Specification==
==Specification==
* 240xRGBx320 Dots TFT Transmissive Dot Matrix LCD Module
* Driving duty:1/240 Duty
* 2.8”(COG type)
* Viewing Angle:12:00 o’clock
* ILI9325 LCD Driver or equivalent
* Logic voltage:2.8V-3.3V
* Data interface:80 system 8/16bit bus interface
* TFT LCD Shield:8 bit bus Mode
* Touch panel
* White backlight
* Power supply:DC 5V


==Resources ==
==Resources ==

Revision as of 14:22, 14 September 2017

keyestudio 2.8 Inch TFT LCD Shield


thumb

Introduction

This is a 2.8 inch TFT LCD touch shield with the drive chip of ILI9325, compatible with Arduino UNO R3. It is very easy and convenient for you to stack it on the top of Arduino UNO R3 when using it. The white button on the shield actually is the reset button.

Specification

  • 240xRGBx320 Dots TFT Transmissive Dot Matrix LCD Module
  • Driving duty:1/240 Duty
  • 2.8”(COG type)
  • Viewing Angle:12:00 o’clock
  • ILI9325 LCD Driver or equivalent
  • Logic voltage:2.8V-3.3V
  • Data interface:80 system 8/16bit bus interface
  • TFT LCD Shield:8 bit bus Mode
  • Touch panel
  • White backlight
  • Power supply:DC 5V

Resources

Datasheet
PDF


Get One Now

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0257_keyestudio_2.8_Inch_TFT_LCD_Shield&oldid=4114"