Ks0276 keyestudio MLX90614 Non-contact Infrared Temperature Sensor

keyestudio MLX90614 Non-contact Infrared Temperature Sensor

Introduction

Keyestudio MLX90614 non-contact infrared temperature sensor is mainly composed of sensor MLX90614. MLX90614 is an infrared non-contact thermometer, and the TO-39 package integrates infrared induction thermoelectric pile detector chip (MLX81101) and signal processing dedicated integrated chip MLX90302. Due to the integration of low noise amplifier, 17-bit analog digital converter and DSP processing unit, the sensor achieves high precision and high resolution measurement.

Specification

• Working voltage：3.3-5V
• Communication way：IIC communication
• Working temperature rang：from -40 to +125 ℃
• Measurement accuracy：±0.5℃（0 to 50℃）

Connection Diagram

Sample Code

/*************************************************** 
  This is a library example for the MLX90614 Temp Sensor

  Designed specifically to work with the MLX90614 sensors in the
  adafruit shop
  ----> https://www.adafruit.com/products/1748
  ----> https://www.adafruit.com/products/1749

  These sensors use I2C to communicate, 2 pins are required to  
  interface
  Adafruit invests time and resources providing this open source code, 
  please support Adafruit and open-source hardware by purchasing 
  products from Adafruit!

  Written by Limor Fried/Ladyada for Adafruit Industries.  
  BSD license, all text above must be included in any redistribution
 ****************************************************/

#include <Wire.h>
#include <Adafruit_MLX90614.h>

Adafruit_MLX90614 mlx = Adafruit_MLX90614();

void setup() {
  Serial.begin(9600);

  Serial.println("Adafruit MLX90614 test");  

  mlx.begin();  
}

void loop() {
  Serial.print("Ambient = "); Serial.print(mlx.readAmbientTempC()); 
  Serial.print("*C\tObject = "); Serial.print(mlx.readObjectTempC()); Serial.println("*C");
  Serial.print("Ambient = "); Serial.print(mlx.readAmbientTempF()); 
  Serial.print("*F\tObject = "); Serial.print(mlx.readObjectTempF()); Serial.println("*F");

  Serial.println();
  delay(500);
}

Library Download of Wire: [1]

Library Download of MLX90614: [2]

Test Reult

Done as the above wiring, program the code, and then open the serial port monitor, the current temperature is shown in figure 1; if a heat source closes to the sensor, it can detect the temperature changes as shown in figure 2.

Figure 1:

Figure 2:

Resources

PDF File:

https://drive.google.com/open?id=1TSZ7i6Zc4yUVHOM5d1ID4CbrB1qe1mr_

Library Download of Wire:

https://drive.google.com/open?id=1xsGNb9_rv1WYm_eo6h0SZmx9uU3SCA_c

Library Download of MLX90614:

https://drive.google.com/open?id=1p5jRPkzLduMMlYGxr7ox20EeeWotpVn3

Get One Now

http://www.keyestudio.com/keyestudio-mlx90614-non-contact-infrared-temperature-sensor.html