Ks0003 keyestudio Protoshield for Arduino with Mini Breadboard: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
Line 43: Line 43:


==Example Use==
==Example Use==
You can first stick the 170-tie points breadboard on the prototyping area of Proto Shield. Stack the shield onto UNO R3 board. Use an LED, a resistor and several breadboard jumper wires to build the circuit experiments.
You can first stick the 170-tie points breadboard on the prototyping area of Proto Shield. Stack the shield onto UNO R3 board. Use an LED, a resistor and several breadboard jumper wires to build the circuit experiments. <br>
<br>[[Image:KS0003-4.png|600px|frameless]]<br>
<br>[[Image:KS0003-4.png|600px|frameless]]<br>


==Resources==
==Resources==

Revision as of 17:22, 30 July 2018

keyestudio Protoshield for Arduino with Mini Breadboard


Introduction

Keyestudio Proto Shield is particularly designed for the Arduino UNO R3. It makes it easy for you to design custom circuits and solder electronics directly on it. For convenient use, there is a large prototyping space of both connected and unconnected spaced through-holes on the shield.
There is also a soldering position reserved for SMD chip on the protoshield. You can easily solder SMD ICs on the prototyping area to test them with your Arduino board. It also extends out a row of power and ground spaced through-holes, giving enough port resources.
You can even stick a mini 170-holes breadboard (included) on the prototyping area. You can weld elements on the shield directly or connect circuits with the mini breadboard.


Product Parameters

  • Can be plugged into the Arduino controller.
  • Extend 5V, 3V and Arduino Vin voltage.
  • Comes with a Reset button.
  • Extend out all control pins and power pins of the Arduino.
  • Able to build the prototyping circuits matched with Arduino.
  • Access to SOIC SMD pin, supporting the soldering of SOIC chips up to 14pin.
  • Includes a 170-hole breadboard.


Controllers Compatible


PCB Dimensions


KS0003-1.png


Pinout Instructions


KS0003-2.png


Mini Breadboard

This is a solderless mini breadboard. It has 10 columns, and 17 rows - a total of 170 tie in points. This mini breadboard has a self-adhesive on the back. You can stick it on the prototyping area of protoshield for solderless operation.
KS0003-3.png


Example Use

You can first stick the 170-tie points breadboard on the prototyping area of Proto Shield. Stack the shield onto UNO R3 board. Use an LED, a resistor and several breadboard jumper wires to build the circuit experiments.

KS0003-4.png

Resources

Datasheet：
https://drive.google.com/open?id=1y5KkI-tbbZhBWUOg_RfLnIeTPZ2VIkMq

Video：
http://www.keyestudio.com/wp/ks0003/


Get One Now

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0003_keyestudio_Protoshield_for_Arduino_with_Mini_Breadboard&oldid=9821"