KS0419 keyestudio micro:bit Tactile Button Module

keyestudio Tactile Button Module For BBC micro:bit

Description

This keyestudio tactile button module is fully compatible with micro:bit control board. It mainly uses a button element, which is a digital signal output device.
When using, connect the module to micro:bit control board using Crocodile clip line.
There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are connected. G for ground; V for 3V; S for signal pin(0 1 2).
When press the button, the signal end of micro:bit main board will input HIGH level signal.

Technical Parameters

• Working voltage: DC 3.0-3.3V
• Output Signal: Digital
• Dimensions: 31mm*27mm*6.5mm
• Weight: 1.8g
• Environmental attributes: ROHS

Connection Diagram

Source Code

Example Result

Connect well the module, then send the source code to the micro:bit main board. Powered on, press the button, the micro:bit main board will show icons.

Resources

• Download relevant datasheet and code:

https://fs.keyestudio.com/KS0419

• BBC micro:bit website
  
• Micro:bit MakeCode Block Editor
  
• Meet micro:bit starter programming
  
• BBC micro:bit Features Guide
  
• BBC micro:bit Safety Warnings
  
• BBC micro:bit Quick Start Guide
  
• BBC micro:bit Pins

Get One Now

• Shop on aliexpress

• Official website