KS5012 Keyestudio ESP32 Learning Kit Basic Edition: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
 
Line 1: Line 1:


== Description ==
About keyestudio  <br>                   
Keyestudio is the best-selling brand of KEYES Corporation. Our products include Arduino development boards, expansion boards, sensors and modules, Raspberry PI, micro:bit expansion boards as well as smart cars, which are committed to learning about Arduino for customers of any level. <br>
Notably, all of our products are in line with international quality standards and are greatly appreciated in different markets across the world. <br>


The Micro:bit motor drive expansion board contains a PCA9685PW chip and a TB6612FNG chip and so on. In order to save IO port resources, we use some pins of PCA9685PW chip to control the TB6612FNG motor chip. The TB6612FNG motor chip is used to control the rotation direction and speed of two DC gear motors.
Welcome to check out more contents from our official website:<br>
It also integrates 2 RGB lights, 4 WS2812RGB lights, a buzzer with a P2.0 ultrasonic interface, a P2.0 IR sensor interface and a P2.0 tracking sensor interface. The output voltages of TXS0108EPWR level conversion IC interface is 5V.
http://www.keyestudio.com<br>


== Parameters ==
Obtain Information and After-sales Service    <br>
1.Download address：https://fs.keyestudio.com/KS5012<br>
2.If something is found missing or broken, or you have some difficulty learning the kit, please feel free to contact us. Welcome to send email to us: service@keyestudio.com. <br>
3.We will seek to update projects and products continuously from your sincere advice.<br>


* Input voltage: DC7-12V
Warning  <br>                           
* Output voltage: 5V
1.Some of the electronic components，sensors as well as modules in this product contain tiny pins, please keep them out of reach of children under 7 years old.
* Length, width and height: 92*64*15mm
2.This product contains conductive parts (control board and electronic module). Please operate according to the requirements of tutorials. Improper operation may cause parts to overheat damage. Do not touch and immediately disconnect the circuit power.<br>
* Weight (bare board): 41.8g


Copyright  <br>                                 
The keyestudio trademark and logo are the copyright of KEYES DIY ROBOT co.,LTD. All products under Keyestudio brand can’t be copied, sold and resold without authorization by anyone or company. If you are interested in our products, please contact to our sales representatives: fennie@keyestudio.com.<br>


== Wiring Up ==


<br>[[File:图片15012-1.png|500px|frameless|thumb]]<br>


== Connection Diagram ==
== Description： ==  
                             
Do you want to learn about programming?
As long as you're passionate about science and dare to explore new things, this kit is surely the best choice for you. The Keyestudio ESP32 Learning Kit Basic Edition mainly contains some common electronic components/sensors/modules, a ESP32 mainboard and bread wires are also included.
As many as 74 project tutorials are provided, which contain detailed wiring diagrams, components knowledge, and fascinating project code. Each project is produced using Thonny for Windows, Arduino IDE for Windows, and Arduino IDE for Raspberry Pi.  It's easy to get started.
You can create numerous fascinating DIY experiments with one controller (ESP32), various of sensors/modules and electronics. These courses can give you a deeper understanding of programming methods, logic, electronic circuits and the Linux operating system (Raspberry Pi).


<br>[[File:图片15012-2.png|500px|frameless|thumb]]<br>
== Kit ==


== Add a library ==
<br>[[File:QQ图片20220805152121.png|500px|frameless|thumb]]<br>


Right-click Extensions
<br>[[File:QQ图片20220805152132.png|500px|frameless|thumb]]<br>


<br>[[File:图片15012-3.png|500px|frameless|thumb]]<br>




Search the link：https://github.com/mworkfun/pxt-turtle-bit.git


== Wiring Up ==


Click [[File:图片15012-6.png|50px|frameless|thumb]] and click the library file.
<br>[[File:图片15012-1.png|500px|frameless|thumb]]<br>


<br>[[File:图片15012-4.png|500px|frameless|thumb]]<br>
== Connection Diagram ==


Then we get the library file.
<br>[[File:图片15012-2.png|500px|frameless|thumb]]<br>


== Projects： ==
                               
Project 01:Hello World <br>
Project 02:Turn On LED <br>
Project 03:LED Flashing <br>
Project 04:Breathing Led <br>
Project 05:Traffic Lights <br>
Project 06:RGB LED<br>
Project 07:Flowing Water Light<br>
Project 08:1-Digit Digital Tube<br>
Project 09:4-Digit Digital Tube<br>
Project 10:8×8 Dot-matrix Display<br>
Project 11:74HC595N Control 8 LEDs<br>
Project 12:Active Buzzer<br>
Project 13:Passive Buzzer<br>
Project 14:Mini Table Lamp<br>
Project 15:Tilt And LED<br>
Project 16:I2C 128×32 LCD<br>
Project 17:Small Fan<br>
Project 18:Dimming Light<br>
Project 19:Flame Alarm<br>
Project 20:Night Lamp<br>
Project 21:Temperature Instrument<br>
Project 22:Bluetooth<br>
Project 23:WiFi Station Mode<br>
Project 24:WiFi AP Mode<br>
Project 25:WiFi Station+AP Mode<br>


<br>[[File:图片15012-5.png|500px|frameless|thumb]]<br>


More information, please refer to Mini Smart Tortoise Car：<br>
Test code, projects, libraries and more, please check them in the following link:


https://wiki.keyestudio.com/KS4014(KS4024)_Keyestudio_Micro%EF%BC%9Abit_Mini_Smart_Tortoise_Car
https://fs.keyestudio.com/KS5012

Latest revision as of 15:42, 5 August 2022

About keyestudio
Keyestudio is the best-selling brand of KEYES Corporation. Our products include Arduino development boards, expansion boards, sensors and modules, Raspberry PI, micro:bit expansion boards as well as smart cars, which are committed to learning about Arduino for customers of any level. 
Notably, all of our products are in line with international quality standards and are greatly appreciated in different markets across the world. 

Welcome to check out more contents from our official website:
http://www.keyestudio.com

Obtain Information and After-sales Service
1.Download address：https://fs.keyestudio.com/KS5012
2.If something is found missing or broken, or you have some difficulty learning the kit, please feel free to contact us. Welcome to send email to us: service@keyestudio.com.
3.We will seek to update projects and products continuously from your sincere advice.

Warning
1.Some of the electronic components，sensors as well as modules in this product contain tiny pins, please keep them out of reach of children under 7 years old. 2.This product contains conductive parts (control board and electronic module). Please operate according to the requirements of tutorials. Improper operation may cause parts to overheat damage. Do not touch and immediately disconnect the circuit power.

Copyright
The keyestudio trademark and logo are the copyright of KEYES DIY ROBOT co.,LTD. All products under Keyestudio brand can’t be copied, sold and resold without authorization by anyone or company. If you are interested in our products, please contact to our sales representatives: fennie@keyestudio.com.


Description：

Do you want to learn about programming? As long as you're passionate about science and dare to explore new things, this kit is surely the best choice for you. The Keyestudio ESP32 Learning Kit Basic Edition mainly contains some common electronic components/sensors/modules, a ESP32 mainboard and bread wires are also included. As many as 74 project tutorials are provided, which contain detailed wiring diagrams, components knowledge, and fascinating project code. Each project is produced using Thonny for Windows, Arduino IDE for Windows, and Arduino IDE for Raspberry Pi.  It's easy to get started. You can create numerous fascinating DIY experiments with one controller (ESP32), various of sensors/modules and electronics. These courses can give you a deeper understanding of programming methods, logic, electronic circuits and the Linux operating system (Raspberry Pi).

Kit


thumb


thumb



Wiring Up


thumb

Connection Diagram


thumb

Projects：

Project 01:Hello World
Project 02:Turn On LED
Project 03:LED Flashing
Project 04:Breathing Led
Project 05:Traffic Lights
Project 06:RGB LED
Project 07:Flowing Water Light
Project 08:1-Digit Digital Tube
Project 09:4-Digit Digital Tube
Project 10:8×8 Dot-matrix Display
Project 11:74HC595N Control 8 LEDs
Project 12:Active Buzzer
Project 13:Passive Buzzer
Project 14:Mini Table Lamp
Project 15:Tilt And LED
Project 16:I2C 128×32 LCD
Project 17:Small Fan
Project 18:Dimming Light
Project 19:Flame Alarm
Project 20:Night Lamp
Project 21:Temperature Instrument
Project 22:Bluetooth
Project 23:WiFi Station Mode
Project 24:WiFi AP Mode
Project 25:WiFi Station+AP Mode


Test code, projects, libraries and more, please check them in the following link:

https://fs.keyestudio.com/KS5012

Retrieved from "http://wiki.keyestudio.com/index.php?title=KS5012_Keyestudio_ESP32_Learning_Kit_Basic_Edition&oldid=34375"