Ks0289 keyestudio LCD2004 3D Module: Difference between revisions
Jump to navigation
Jump to search
Keyestudio (talk | contribs) |
Keyestudio (talk | contribs) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
<br> | |||
== Introduction == | == Introduction == | ||
Keyestudio LCD2004 3D module includes a SD card reader, a rotary encoder and a 20 character * 4 line LCD. <br>When this control panel is connected to RAMPS 1.4, you don’t need your PC anymore. The smart control panel supplies power for your SD card. Further more actions like calibration, axes movements can be done by adjusting the rotary encoder on the Smart Control panel. With g-code design stored on the SD card, you can print your 3D designs without PC. | Keyestudio LCD2004 3D module includes a SD card reader, a rotary encoder and a 20 character * 4 line LCD. <br> | ||
<br>[[File: | When this control panel is connected to RAMPS 1.4, you don’t need your PC anymore. The smart control panel supplies power for your SD card. <br> | ||
Further more actions like calibration, axes movements can be done by adjusting the rotary encoder on the Smart Control panel. With g-code design stored on the SD card, you can print your 3D designs without PC. <br> | |||
<br>[[File:Ks0289.png|500px|frameless|thumb]]<br> | |||
<br> | |||
==Shipping List== | ==Shipping List== | ||
* keyestudio LCD2004 3D module * 1 | * keyestudio LCD2004 3D module * 1 | ||
* Ribbon Cable * 2 | * Ribbon Cable * 2 | ||
<br>[[File:KS0289 (1).jpg|500px|frameless|thumb]]<br> | |||
== Test | <br> | ||
<br>[[File: | == Example Test == | ||
Connect the LCD 2004 3D module to RAMPS 1.4 control board, after programming the MEGA 2560, the LCD screen will pop up the test data.<br> | |||
<br>[[File:Ks0289-1.png|500px|frameless|thumb]]<br> | |||
<br> | |||
== Resources == | == Resources == | ||
''' | * '''Marlin Package:''' <br> | ||
https:// | https://fs.keyestudio.com/KS0289 | ||
<br> | |||
== Buy From == | == Buy From == | ||
*[https://www.keyestudio.com/keyestudio-lcd2004-display-3d-module-with-sd-card-slot-30cm-cable-for-arduino-3d-printer-p0291-p0291.html Official website ] | |||
*[https://www.aliexpress.com/store/product/Keyestudio-LCD2004-Display-3D-Module-With-SD-Card-Slot-30cm-Cable-For-Arduino-3D-Printer/1452162_32848075702.html?spm=2114.12010615.8148356.1.334b3293S1w3g1 Shop on aliexpress] | |||
[[Category: Module]] | [[Category: Module]] | ||
Latest revision as of 15:25, 7 January 2021
Introduction
Keyestudio LCD2004 3D module includes a SD card reader, a rotary encoder and a 20 character * 4 line LCD.
When this control panel is connected to RAMPS 1.4, you don’t need your PC anymore. The smart control panel supplies power for your SD card.
Further more actions like calibration, axes movements can be done by adjusting the rotary encoder on the Smart Control panel. With g-code design stored on the SD card, you can print your 3D designs without PC.
Shipping List
- keyestudio LCD2004 3D module * 1
- Ribbon Cable * 2
.jpg)
Example Test
Connect the LCD 2004 3D module to RAMPS 1.4 control board, after programming the MEGA 2560, the LCD screen will pop up the test data.
Resources
- Marlin Package:
https://fs.keyestudio.com/KS0289