Ks0227 keyestudio EASY plug Blue LED Module: Difference between revisions
Keyestudio (talk | contribs) |
Keyestudio (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
| Line 29: | Line 28: | ||
== Connect It Up == | == Connect It Up == | ||
Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.<br> | Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.<br> | ||
<br>[[File:Ks0227 | <br>[[File:Ks0227.png|600px|frameless|thumb]]<br> | ||
<br> | <br> | ||
== Upload the Code == | == Upload the Code == | ||
Below is an example code for LED blinking. Open or drag below code to [https://wiki.keyestudio.com/Getting_Started_with_Mixly Mixly Blocks] and upload. <br> | |||
<br>[[File:Ks0227-图片1-.png|500px|frameless|thumb]]<br> | |||
< | <br> | ||
==What You Should See== | |||
<br>[[File:Ks0227-图片2-.png|500px|frameless|thumb]]<br> | |||
<br> | |||
The LED will flash on for one second, then blink off for one second. <br> | |||
<br>[[File:0397 Result2-3.png|500px|frameless|thumb]]<br> | |||
<br> | |||
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.<br> | |||
< | |||
<br> | <br> | ||
= | <span style="color: red">'''Little Knowledge:'''</span> <br> | ||
If you want to make the LED flash on and off more quickly or slowly, you can modify the Delay time here.<br> | |||
<br>[[File:Ks0227-图片3.png|500px|frameless|thumb]]<br> | |||
<br> | <br> | ||
==Resources == | ==Resources == | ||
'''Download the | '''Download the Arduino Code and datasheet:'''<br> | ||
https://drive.google.com/open?id= | https://drive.google.com/open?id=1oVGK0E-8lGA-pSxRXnIy8yDpfmPn3eTT | ||
'''Download the Mixly Code and datasheet:'''<br> | |||
https://drive.google.com/open?id=1eGHdJnS4XXTx_4FCk7vTEz39viiugPhL | |||
<br> | <br> | ||
Revision as of 13:44, 8 May 2019
Introduction
This is a special EASY plug blue LED module. When connecting to ARDUINO, after programming, it can emit blue light.
For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0
You should connect the LED module to control board for communication using an RJ11 cable.
You can combine with other sensors to do various interactive experiments.
You can also choose other LED modules to emit different light color like yellow, red, green and white.
Features
- Interface: Easy plug
- Sensor type: Digital
- Working voltage: 5V
- LED color: blue
- Easy to use
- Useful for light projects
Technical Details
- Dimensions: 34mm*20mm*18mm
- Weight: 3.8g
Connect It Up
Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
Upload the Code
Below is an example code for LED blinking. Open or drag below code to Mixly Blocks and upload.
What You Should See
The LED will flash on for one second, then blink off for one second.
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.
Little Knowledge:
If you want to make the LED flash on and off more quickly or slowly, you can modify the Delay time here.
Resources
Download the Arduino Code and datasheet:
https://drive.google.com/open?id=1oVGK0E-8lGA-pSxRXnIy8yDpfmPn3eTT
Download the Mixly Code and datasheet:
https://drive.google.com/open?id=1eGHdJnS4XXTx_4FCk7vTEz39viiugPhL