KS0372 EASY plug Servo Module +Micro Servo: Difference between revisions
Keyestudio (talk | contribs) No edit summary |
Keyestudio (talk | contribs) No edit summary |
||
| Line 6: | Line 6: | ||
Here comes EASY plug Servo module and a 180° Micro Servo together in the package.<br> | Here comes EASY plug Servo module and a 180° Micro Servo together in the package.<br> | ||
<br> | <br> | ||
'''Package Includes'''<br> | |||
* EASY plug Servo Module *1 | * EASY plug Servo Module *1 | ||
* Micro Servo *1 | * Micro Servo *1 | ||
| Line 13: | Line 13: | ||
The EASY plug Servo module is extended into Registered Jack, so you can connect it to EASY PLUG control board using only a RJ11 cable.<br> | The EASY plug Servo module is extended into Registered Jack, so you can connect it to EASY PLUG control board using only a RJ11 cable.<br> | ||
The Servo module also comes with 3pins of 2.54mm pin pitch, fully compatible with servo pins.<br> | The Servo module also comes with 3pins of 2.54mm pin pitch, fully compatible with servo pins.<br> | ||
[[image:0372-图片1.png|thumb| | [[image:0372-图片1.png|thumb|250px|right|EASY plug Servo Module]] | ||
<br> | <br> | ||
Servo motor comes with many specifications. But all of them have three connection wires, distinguished by brown, red, orange colors. Brown one is for ground, red one for power positive, orange one for signal line. | Servo motor comes with many specifications. But all of them have three connection wires, distinguished by brown, red, orange colors. Brown one is for ground, red one for power positive, orange one for signal line. | ||
[[image:0372-图片2.png|thumb| | [[image:0372-图片2.png|thumb|250px|right| Micro Servo ]] | ||
Included with your Micro Servo you will find a variety of white motor mounts that connect to the shaft of your servo. You may choose to attach any mount you wish for the circuit. It will serve as a visual aid, making it easier to see the servo spin.<br> | Included with your Micro Servo you will find a variety of white motor mounts that connect to the shaft of your servo. You may choose to attach any mount you wish for the circuit. It will serve as a visual aid, making it easier to see the servo spin.<br> | ||
The rotation angle of Servo motor is controlled by regulating the duty cycle of PWM (Pulse-Width Modulation) signal. The standard cycle of PWM signal is 20ms (50Hz).<br> | The rotation angle of Servo motor is controlled by regulating the duty cycle of PWM (Pulse-Width Modulation) signal. The standard cycle of PWM signal is 20ms (50Hz).<br> | ||
| Line 47: | Line 46: | ||
==Upload the Code== | ==Upload the Code== | ||
Below is an example code. Open or drag below code to [https://wiki.keyestudio.com/Getting_Started_with_Mixly Mixly Blocks] and upload. <br> | Below is an example code. Open or drag below code to [https://wiki.keyestudio.com/Getting_Started_with_Mixly Mixly Blocks] and upload. <br> | ||
<br>[[File:ks0398 10.1.png| | <br>[[File:ks0398 10.1.png|600px|frameless|thumb]]<br> | ||
<br> | <br> | ||
==What You Should See== | ==What You Should See== | ||
<br>[[File:ks0398 10-1.png| | <br>[[File:ks0398 10-1.png|600px|frameless|thumb]]<br> | ||
<br> | <br> | ||
After uploading the code, open the serial monitor, enter the number 1 to 9, and click Send, it will control the servo motor rotate at a certain angle. | After uploading the code, open the serial monitor, enter the number 1 to 9, and click Send, it will control the servo motor rotate at a certain angle. | ||
| Line 68: | Line 67: | ||
<br> | <br> | ||
==Resources == | ==Resources == | ||
'''Download the PDF:'''<br> | '''Download the Arduino Code and PDF:'''<br> | ||
https://drive.google.com/open?id= | https://drive.google.com/open?id=1bHXCkYVAKkyWzqVm-njHSh3Ijw2al3do | ||
'''Download the Code:'''<br> | '''Download the Mixly Code and PDF:'''<br> | ||
https://drive.google.com/open?id= | https://drive.google.com/open?id=1kF1zDDRj5mnB9MkB14fDC-KD72EnayyQ | ||
<br> | <br> | ||
==Buy from == | ==Buy from == | ||
* | *[https://www.keyestudio.com/keyestudio-easy-plug-servo-module-micro-servo-for-arduino-robot-p0502-p0502.html '''Official Website'''] | ||
*[https://www.aliexpress.com/store/product/Keyestudio-EASY-plug-Servo-Module-Micro-Servo-For-Arduino-Robot/1452162_32957802455.html?spm=2114.12010612.8148356.14.65312f0ctA7PJG Shop on aliexpress ] | *[https://www.aliexpress.com/store/product/Keyestudio-EASY-plug-Servo-Module-Micro-Servo-For-Arduino-Robot/1452162_32957802455.html?spm=2114.12010612.8148356.14.65312f0ctA7PJG Shop on aliexpress ] | ||
Revision as of 17:06, 8 May 2019
Introduction
If you want to use the Micro Servo and EASY PLUG control board to make experiments, you need to use the EASY plug Servo extension module.
Here comes EASY plug Servo module and a 180° Micro Servo together in the package.
Package Includes
- EASY plug Servo Module *1
- Micro Servo *1
The EASY plug Servo module is extended into Registered Jack, so you can connect it to EASY PLUG control board using only a RJ11 cable.
The Servo module also comes with 3pins of 2.54mm pin pitch, fully compatible with servo pins.
Servo motor comes with many specifications. But all of them have three connection wires, distinguished by brown, red, orange colors. Brown one is for ground, red one for power positive, orange one for signal line.
Included with your Micro Servo you will find a variety of white motor mounts that connect to the shaft of your servo. You may choose to attach any mount you wish for the circuit. It will serve as a visual aid, making it easier to see the servo spin.
The rotation angle of Servo motor is controlled by regulating the duty cycle of PWM (Pulse-Width Modulation) signal. The standard cycle of PWM signal is 20ms (50Hz).
Theoretically, the width is distributed between 1ms-2ms, but in fact, it’s between 0.5ms -2.5ms. The width corresponds to the rotation angle from 0° to 180°.
Micro Servo Parameters
- Operating voltage: DC 4.8V〜6V
- Angle range: about 180°(in 500→2500μsec)
- Pulsewidth range: 500→2500μsec
- No-load speed: 0.12±0.01 sec/60（DC 4.8V）; 0.1±0.01 sec/60（DC 6V）
- No-load current: 200±20mA（DC 4.8V）; 220±20mA（DC 6V）
- Stop torque: 1.3±0.01kg/cm（DC 4.8V）; 1.5±0.1kg/cm（DC 6V）
- Stop current: ≦850mA（DC 4.8V）; ≦1000mA（DC 6V）
- Standby current: 3±1mA（DC 4.8V）; 4±1mA（DC 6V）
- Operation temperature: -10℃〜50℃
- Save temperature: -20℃〜60℃
- Motor wire length: 250 ± 5 mm
Connect It Up
Connect the EASY Plug servo module and micro servo to control board using an RJ11 cable.
Connect the servo motor to EASY Plug Servo module. Brown line is for ground, red one for V pin, orange one for signal pin.
Then connect the control board to your PC with a USB cable.
Upload the Code
Below is an example code. Open or drag below code to Mixly Blocks and upload.
What You Should See
After uploading the code, open the serial monitor, enter the number 1 to 9, and click Send, it will control the servo motor rotate at a certain angle.
Rotating back and forth
Complete the above project, you can also upload the code below to control the servo motor rotating back and forth at a certain angle.
Test Code:
Resources
Download the Arduino Code and PDF:
https://drive.google.com/open?id=1bHXCkYVAKkyWzqVm-njHSh3Ijw2al3do
Download the Mixly Code and PDF:
https://drive.google.com/open?id=1kF1zDDRj5mnB9MkB14fDC-KD72EnayyQ