KS0413 keyestudio ESP32 Core Board: Difference between revisions

Revision as of 10:19, 20 June 2019

Keyestudio ESP32 Core Board (Black and Eco-friendly)

Description

This keyestudio ESP32 core board is a Mini development board based on the ESP-WROOM-32 module.
The board has brought out most I/O ports to pin headers of 2.54mm pitch. These provide an easy way of connecting peripherals according to your own needs.
When it comes to developing and debugging with the development board, the both side standard pin headers can make your operation more simple and handy.

The ESP-WROOM-32 module is the industry's leading integrated WiFi + Bluetooth solution with less than 10 external components.
It integrates antenna switch, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
At the same time, it also integrates with TSMC's low-power 40nm technology, so that power performance and RF performance are safe and reliable, easy to expand to a variety of applications.

Technical Details

Microcontroller: ESP-WROOM-32 module
USB to Serial Port Chip: CP2102-GMR
Operating Voltage: DC 5V
Operating Current: 80mA (average)
Current Supply: 500mA (Minimum)
Operating Temperature Range: -40℃ ~ +85℃
WiFi mode: Station/SoftAP/SoftAP+Station/P2P
WiFi protocol: 802.11 b/g/n/e/i (802.11n, speed up to 150 Mbps
WiFi frequency range: 2.4 GHz ~ 2.5 GHz
Bluetooth protocol: conform to Bluetooth v4.2 BR/EDR and BLE standards
Dimensions: 55mm*26mm*13mm
Weight: 9.3g

Element and Interfaces

Here is an explanation of what every element and interface of the board has:

Specialized Functions of Some Pins

Detailed Using Methods are as follows:

Step1| Install the Arduino IDE

When programming the control board, first you should install the Arduinosoftware and driver.
You can download the different versions for different systems from the link below:
https://www.arduino.cc/en/Main/OldSoftwareReleases#1.5.x
This control board is compatible with the Arduino 1.8.7 or latest version.
So next we will download the Arduino 1.8.7 software to test the keyestudio ESP32 core board.

In this Windows system page, there are two options. One is Windows version, the other is Windows Installer.
For simple Windows version, you can download the software directly, do not need to install, just directly use the software after unzip the file.

Next, we click the Windows, pop up the interface as below.

Click JUST DOWNLOAD.
Downloaded well the arduino-1.8.7-windows.zip package to your computer, you can direct to unzip the package.
Open the Arduino-1.8.7 folder, you should get it as follows.

Click the icon of ARDUINO software to open it. This is your Arduino.

Step2| Installing the Driver

The USB to serial port chip of this control board is CP2102-GMR. So you need to install the driver for the chip.
You can click the driver tool download link:
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers

It includes different drivers for different computer’s systems. Download and install the driver according to your computer’s system.
For example, we download the driver for Windows 7. Get the compression package of CP210x_Windows_Drivers

Then extract the compression package; you should see the application to install.

The driver software installation is very simple. Just select the driver application as you like.
Click to .exe package to install the driver. Click “Next”.

Click to select “I accept this agreement” and click “Next”.

Wait for the installation complete. Finally click “Finish” to close the window.

Step3| Building ESP32 Environment

At first, open the Arduino-1.8.7 folder, you will see the hardware folder;

Then open the hardware folder and add a new folder, remember to name it espressif shown below.

After that, unzip the esp32 compression package we provided, and copy and paste esp32 folder inside the espressif folder.

So inside the espressif folder should see the esp32 folder as below. Note that the folder should not name a type.

Now, click to enter the esp32 folder and you can see the tools folder below.

Enter the tools folder and click to run the get.exe application as an administrator.
(But the precondition is that you have already installed the Python)

When run the get.exe application, ensure that your network is unblocked and wait for the program download.
Done downloading, the following window will automatically close.

Step3|Arduino IDE Setting and Toolbar

Double-click the icon of Arduino software downloaded to open the IDE.

This is your Arduino 1.8.7 interface.

(Note: if the Arduino software loads in the wrong language, you can change it in the preferences dialog. See the environment page for details.)

The functions of each button on the Toolbar are listed below:

Verify/Compile	Check the code for errors
Upload	Upload the current Sketch to the Arduino
New	Create a new blank Sketch
Open	Show a list of Sketches
Save	Save the current Sketch
Serial Monitor	Display the serial data being sent from the Arduino

Attach your esp32 core board to your computer with the USB cable.

Check that the “Board Type”and “Serial Port” are set correctly.
Click to open the “Tools”, for “Board”, scroll to select the ESP32 Dev Module.

Select well the correct board and then should set the detailed information as shown below.

Pay close attention to select the proper COM port. (Arduino driver installed well, you are supposed to see the corresponding port.)
Check out the COM port in the Device Manager of your computer’s control panel.

Here we can know the COM port is COM 8. Then select the Port COM 8 in the Arduino Tools.

Step5| Upload the Code

Paste and copy the source code below to Arduino IDE.
Special Note: when compile and upload the source code, hold the BOOT button on the ESP32 board until upload well the code.

/*
 *  This sketch demonstrates how to scan WiFi networks.
 *  The API is almost the same as with the WiFi Shield library,
 *  the most obvious difference being the different file you need to include:
 */
#include "WiFi.h"

void setup()
{
    Serial.begin(115200);

    // Set WiFi to station mode and disconnect from an AP if it was previously connected
    WiFi.mode(WIFI_STA);
    WiFi.disconnect();
    delay(100);

    Serial.println("Setup done");
}

void loop()
{
    Serial.println("scan start");

    // WiFi.scanNetworks will return the number of networks found
    int n = WiFi.scanNetworks();
    Serial.println("scan done");
    if (n == 0) {
        Serial.println("no networks found");
    } else {
        Serial.print(n);
        Serial.println(" networks found");
        for (int i = 0; i < n; ++i) {
            // Print SSID and RSSI for each network found
            Serial.print(i + 1);
            Serial.print(": ");
            Serial.print(WiFi.SSID(i));
            Serial.print(" (");
            Serial.print(WiFi.RSSI(i));
            Serial.print(")");
            Serial.println((WiFi.encryptionType(i) == WIFI_AUTH_OPEN)?" ":"*");
            delay(10);
        }
    }
    Serial.println("");

    // Wait a bit before scanning again
    delay(5000);
}

Then click verify button to check the errors. If compiling successfully, the message "Done compiling." will appear in the status bar.

After that, click the “Upload” button to upload the code. If the upload is successful, the message "Done uploading." will appear in the status bar.
Special Note: when compile and upload the source code, hold the BOOT button on the ESP32 board until upload well the code.

Done uploading the code to your board, open the serial monitor and set the baud rate to 115200.
You should be able to see the WIFI information on the pop-up window.

Well done! Now the test is complete!

Resources Download

You can download the datasheet from the link:

https://drive.google.com/open?id=1qZ8MGRd-KwlD4wXACALr3P6Vc-4Xib2N

ARDUINO Software:

https://www.arduino.cc/en/Main/OldSoftwareReleases#1.5.x

Download the Driver:

https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers

Buy From

official website

Shop on Aliexpress