Ks0036 keyestudio Flame Sensor

Introduction

This flame sensor can be used to detect fire or other lights whose wavelength stands at 760 nm ~ 1100 nm. In the fire-fighting robot game, the flame plays an important role in the probe, which can be used as the robot's eyes to find fire source.

Specification

• Supply Voltage: 3.3V to 5V
• Detection Range: 20cm (4.8V) ~ 100cm (1V)
• Rang of Spectral Bandwidth: 760nm to 1100nm
• Operating Temperature: -25℃to 85℃
• Interface: Digital
• Size: 44*16.7mm
• Weight: 4g

Connection Diagram

Sample Code

const int flamePin = 2;     // the number of the flame pin
const int ledPin =  13;      // the number of the LED pin
// variables will change:
int State = 0;         // variable for reading status
void setup() {
  // initialize the LED pin as an output:
  pinMode(ledPin, OUTPUT);      
  // initialize the pushbutton pin as an input:
  pinMode(flamePin, INPUT);     
}
void loop(){
  // read the state of the value:
State = digitalRead(flamePin);
  if (State == HIGH) {     
    // turn LED on:    
    digitalWrite(ledPin, HIGH);  
  } 
  else {
    // turn LED off:
    digitalWrite(ledPin, LOW); 
}

Resources

Video

http://www.keyestudio.com/wp/2016/05/ks0036-keyestudio-flame-sensor-module/

Datasheet

http://www.keyestudio.com/files/index/download/id/1463650865/

Buy from

Official Website

http://www.keyestudio.com/keyestudio-flame-sensor-for-arduino.html

Amazon Store

https://www.amazon.com/Keyestudio-Flame-Sensor-Arduino-raspberry/dp/B0172UM4RC/ref=sr_1_1?ie=UTF8&qid=1479956399&sr=8-1&keywords=keyestudio+Flame+Sensor+for+Arduino