Ks0125 keyestudio EASY plug IR Receiver Module

EASY plug IR Receiver Module

Introduction

Infrared receiver is a component with functions of reception, amplification, and demodulation. Its internal IC has already completed demodulation so it directly outputs digital signal. This module is usually used together with IR transmitter module.
Note: this module needs to be used together with EASY plug control board.

Specification

• Interface: Easy plug
• Power Supply: 5V
• Interface:Digital
• Modulate Frequency: 38Khz
• Module interface socket:JST PH2.0
• Size: 38*20mm
• Weight: 6g

Connection Diagram

Sample Code

#include <IRremote.h>
int RECV_PIN = 11;
IRrecv irrecv(RECV_PIN);
decode_results results;
void setup()
{
 Serial.begin(9600);
 irrecv.enableIRIn(); // Start the receiver
}
void loop() {
 if (irrecv.decode(&results)) {
   Serial.println(results.value, HEX);
   irrecv.resume(); // Receive the next value
 }
}

IR Remote Library Includes some sample codes for sending and receiving.
https://github.com/shirriff/Arduino-IRremote

Resources

PDF

https://drive.google.com/open?id=1Bd8z3tDzPLs3puvR_fCl_pRG2oV4O8-I

Libraries

https://drive.google.com/open?id=1CSwjDND5RjJ2ADLR_wIphvN0ZgPRhc3i

Buy from

http://www.keyestudio.com/keyestudio-easy-plug-ir-infrared-receiver-module-for-arduino-starter.html