Ks0253 keyestudio GPS Shield

keyestudio GPS Shield

Introduction

It is based on the NEO - 6 u blox 6 GPS module, and its pins are compatible with Arduino/MEGA board. Regular GPS pins (RX, TX) can be connected to Arduino D0-D7. Several GPS receivers are easily installed on the expansion board and you can find your exact position within a few meters. At the same time, GPS also provides a very accurate time for you! It is applied to automobile navigation, personal positioning, team management, navigation and so on.

Performance Parameters

• Compatible with main controller on the market,such as UNO R3 and MEGA2560
• Using 6-channel LED indicator to show the working condition of program for modulating program conveniently
• Switching functions with 3-channel keyswitch
• One reset button
• Using revolving potentiometer to do analog input
• Alarming and making sound by passive buzzer module
• Using 4 bit LED Segment Displays to display data

Sample Code

/*

 Demo code for GPS Shield
 It records the GPS information onto the TF card, 
 and display on serial monitor as well.

 http://makerstudio.cc

• /

1. include <SD.h>
2. include <SPI.h>
3. include <SoftwareSerial.h>

const int chipSelect = 10;

SoftwareSerial mySerial(6,7);//(RX,TX), (7->GPS_TX,6->GPS_RX)

void setup() {

 Serial.begin(9600);
 mySerial.begin(9600);
 
 pinMode(10, OUTPUT);
 if (!SD.begin(chipSelect)) {
  
   return;
 }

}

void loop() {

 // make a string for assembling the data to log:
 char index = 0;
 char temp = 0;
 String dataString = "";
 
 // open the file. note that only one file can be open at a time,
 // so you have to close this one before opening another.
 File dataFile = SD.open("datalog.txt", FILE_WRITE);
 if(dataFile)
 {

while(mySerial.available()) { temp = mySerial.read(); Serial.print(temp); dataString += String(temp); index++; if(index>200) break; } dataFile.print(dataString);

dataFile.close();

 }else
 {

Serial.println("Open file failed");

 }

}

Get One Now

http://www.keyestudio.com/catalogsearch/result/?q=ks0253