Ks0184 keyestudio Multi-purpose Shield V2

keyestudio Multi-purpose Shield V2

Introduction

Multi-purpose Shield V2 is a learning board based on Arduino. No need for soldering and connection. Download directly the program to complete experiment. It is multi-purpose and we offer code libraries of all modules that have been tested. You can use them directly. There are extended ports on the shield to help you to complete other experiment.

Specification

• Compatible with main controller on the market,such as UNO R3 and MEGA2560
• Using 6-channel LED indicator to show the working condition of program for modulating program conveniently
• Switching functions with 3-channel keyswitch
• One reset button
• Using revolving potentiometer to do analog input
• Alarming and making sound by passive buzzer module
• Using 4 bit LED Segment Displays to display data

Connection Diagram

Upload program to keyestudio UNO R3 BOARD, and plug this shield into UNO R3 BOARD.

Sample Code

Download the Code: [1] or you can directly copy the below code.

//pressing nothing to display value of analog revolving potentiometer
//pressing key1 to show 0-3 on LED Segment Displays
//pressing key2 and buzzer ringing
//pressing key3 and flowing light on

//defining three pins of 74HC595
int latchPin = 4;//ST_CP
int clockPin = 5;//SH_CP 
int dataPin = 2; //DS 

//defining three key input
int key1 = A1;
int key2 = A2;
int key3 = A3;

//buzzer pin
int buzzer = 3;

//pin definition of flowing light
int led1 = 13;
int led2 = 12;
int led3 = 11;
int led4 = 10;
int led5 = 9;
int led6 = 8;


int dat_wei[4]={0x01,0x02,0x04,0x08};    //LED Segment Displays
showing 1--4
int dat_duan[10]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90}; //LED Segment Displays showing 0--9
char i=0; 
void setup ()
{
  pinMode(latchPin,OUTPUT);
  pinMode(clockPin,OUTPUT);
  pinMode(dataPin,OUTPUT); 
  
  pinMode(key1,INPUT); 
  pinMode(key2,INPUT); 
  pinMode(key3,INPUT); 
  
  pinMode(buzzer,OUTPUT);

  pinMode(led1,OUTPUT);
  pinMode(led2,OUTPUT);
  pinMode(led3,OUTPUT); 
  pinMode(led4,OUTPUT);
  pinMode(led5,OUTPUT);
  pinMode(led6,OUTPUT); 
  for(char i=8;i<14;i++)
   digitalWrite(i,HIGH);    
}
  
void loop()
{
if(digitalRead(key1)==LOW )
  SMG();                    //testing LED Segment Displays
if(digitalRead(key2)==LOW )
  buzzer_();                //testing buzzer
if(digitalRead(key3)==LOW)
  led_display();            //testing LED
if(digitalRead(key1)==HIGH & digitalRead(key2)==HIGH & digitalRead(key3)==HIGH)  
  analog();                //testing analog input
}

void SMG(void)
{
 digitalWrite(latchPin,LOW);                         //clear LED Segment Displays
 shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
 shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
 digitalWrite(latchPin,HIGH);
   
while(1)
 {
 digitalWrite(latchPin,LOW);
                                                       //MSBFIRST,transmitting binary bit from high to low,74HC595 starts from first piece, and displaces data from Q0 to Q7. If there is data, it will start from the second piece like this.
 shiftOut(dataPin, clockPin, MSBFIRST ,dat_duan[i]);   //data about second piece     
 shiftOut(dataPin, clockPin, MSBFIRST ,dat_wei[i]);    //way of MSBFIRST,data about first piece
 digitalWrite(latchPin,HIGH);
 i++;
 if(i==4){i=0;}
 if(digitalRead(key1)==HIGH)
 {
   digitalWrite(latchPin,LOW);                         //clear LED Segment Displays
   shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
   shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
   digitalWrite(latchPin,HIGH);
   break;
 }
 }
}

void buzzer_(void)
{
 char i;
 
 digitalWrite(latchPin,LOW);                         //clear LED Segment Displays
 shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
 shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
 digitalWrite(latchPin,HIGH);
   
 while(1)
 {
 for(i=0;i<80;i++)// output a frequency sound
 { 
  digitalWrite(buzzer,LOW);// sound
  delay(1);//delay1ms 
  digitalWrite(buzzer,HIGH);//not sound
  delay(1);//ms delay 
 } 
 for(i=0;i<100;i++)// output a frequency sound
 { 
  digitalWrite(buzzer,LOW);// sound
  digitalWrite(buzzer,HIGH);//not sound
  delay(2);//2ms delay 
 }
 if(digitalRead(key2)==HIGH)
 {
   digitalWrite(latchPin,LOW);                         //clear LED Segment Displays
   shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
   shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
   digitalWrite(latchPin,HIGH);
   break;
 }
 }
}

void led_display()
{
digitalWrite(latchPin,LOW);                         //clear LED Segment Displays
shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
digitalWrite(latchPin,HIGH);

while(1)
{
 digitalWrite(led1,LOW);
 delay(100);
 digitalWrite(led1,HIGH);
 digitalWrite(led2,LOW);
 delay(100);
 digitalWrite(led2,HIGH);
 digitalWrite(led3,LOW);
 delay(100);
 digitalWrite(led3,HIGH);
 digitalWrite(led4,LOW);
 delay(100);
 digitalWrite(led4,HIGH);
 digitalWrite(led5,LOW);
 delay(100);
 digitalWrite(led5,HIGH);
 digitalWrite(led6,LOW);
 delay(100);
 digitalWrite(led6,HIGH);
 if(digitalRead(key3)==HIGH)
 {
   break;
 }
}
}


void analog()
{
int val,qian,bai,shi,ge;
val=analogRead(A0);
qian=val/1000;
bai=val%1000;
bai=bai/100;
shi=val%100;
shi=shi/10;
ge=val%10;
digitalWrite(latchPin,LOW);
shiftOut(dataPin, clockPin, MSBFIRST ,dat_duan[qian]);
shiftOut(dataPin, clockPin, MSBFIRST ,0x01);
digitalWrite(latchPin,HIGH);
digitalWrite(latchPin,LOW);
shiftOut(dataPin, clockPin, MSBFIRST ,dat_duan[bai]);
shiftOut(dataPin, clockPin, MSBFIRST ,0x02);
digitalWrite(latchPin,HIGH);
digitalWrite(latchPin,LOW);
shiftOut(dataPin, clockPin, MSBFIRST ,dat_duan[shi]);
shiftOut(dataPin, clockPin, MSBFIRST ,0x04);
digitalWrite(latchPin,HIGH);
digitalWrite(latchPin,LOW);
shiftOut(dataPin, clockPin, MSBFIRST ,dat_duan[ge]);
shiftOut(dataPin, clockPin, MSBFIRST ,0x08);
digitalWrite(latchPin,HIGH);
}

Result

After powering on, indicator D1 is on, TX light on the board is blinking and indicator of LED13 is always on. Press nothing to display value of analog revolving potentiometer; press key1 to show 0-3 on LED Segment Displays; press key2 and buzzer rings; press key3 and only flowing light turns on.

Get One Now

http://www.keyestudio.com/keyestudio-multi-purpose-shield-v2.html