Ks0253 keyestudio GPS Shield: Difference between revisions
Jump to navigation
Jump to search
Keyestudio (talk | contribs) |
Keyestudio (talk | contribs) |
||
Line 78: | Line 78: | ||
http://www.keyestudio.com/files/index/download/id/1500511279/ | http://www.keyestudio.com/files/index/download/id/1500511279/ | ||
'''Libraries Download of SD and SPI:''' | |||
http://www.keyestudio.com/files/index/download/id/1508290570/ | |||
==Get One Now == | ==Get One Now == |
Revision as of 09:37, 18 October 2017
keyestudio GPS Shield
Introduction
It is based on the NEO - 6 u blox 6 GPS module, and its pins are compatible with Arduino/MEGA board. Regular GPS pins (RX, TX) can be connected to Arduino D0-D7. Several GPS receivers are easily installed on the expansion board and you can find your exact position within a few meters. At the same time, GPS also provides a very accurate time for you! It is applied to automobile navigation, personal positioning, team management, navigation and so on.
Performance Parameters
- Compatible with main controller on the market,such as UNO R3 and MEGA2560
- Using 6-channel LED indicator to show the working condition of program for modulating program conveniently
- Switching functions with 3-channel keyswitch
- One reset button
- Using revolving potentiometer to do analog input
- Alarming and making sound by passive buzzer module
- Using 4 bit LED Segment Displays to display data
Sample Code
/* Demo code for GPS Shield It records the GPS information onto the TF card, and display on serial monitor as well. */ #include <SD.h> #include <SPI.h> #include <SoftwareSerial.h> const int chipSelect = 10; SoftwareSerial mySerial(6,7);//(RX,TX), (7->GPS_TX,6->GPS_RX) void setup() { Serial.begin(9600); mySerial.begin(9600); pinMode(10, OUTPUT); if (!SD.begin(chipSelect)) { return; } } void loop() { // make a string for assembling the data to log: char index = 0; char temp = 0; String dataString = ""; // open the file. note that only one file can be open at a time, // so you have to close this one before opening another. File dataFile = SD.open("datalog.txt", FILE_WRITE); if(dataFile) { while(mySerial.available()) { temp = mySerial.read(); Serial.print(temp); dataString += String(temp); index++; if(index>200) break; } dataFile.print(dataString); dataFile.close(); }else { Serial.println("Open file failed"); } }
Resources
Datasheet
http://www.keyestudio.com/files/index/download/id/1500511279/
Libraries Download of SD and SPI:
http://www.keyestudio.com/files/index/download/id/1508290570/