Ks0019 keyestudio Passive Buzzer module

Passive Buzzer module

Introduction

We can use Arduino to make many interactive works of which the most commonly used is acoustic-optic display. All the previous experiment has something to do with LED. However, the circuit in this experiment can produce sound. Normally, the experiment is done with a buzzer or a speaker while buzzer is simpler and easier to use. The buzzer we introduced here is a passive buzzer. It cannot be actuated by itself, but by external pulse frequencies. Different frequencies produce different sounds. We can use Arduino to code the melody of a song, which is actually quite fun and simple.

Specification

• Working voltage: 3.3-5v
• Interface type: digital
• Size: 30*20mm
• Weight: 4g

Connection Diagram

Sample Code

 int buzzer=8;//set digital IO pin of the buzzer
void setup() 
{ 
pinMode(buzzer,OUTPUT);// set digital IO pin pattern, OUTPUT to be output 
} 
void loop() 
{ unsigned char i,j;//define variable
while(1) 
{ for(i=0;i<80;i++)// output a frequency sound
{ digitalWrite(buzzer,HIGH);// sound
delay(1);//delay1ms 
digitalWrite(buzzer,LOW);//not sound
delay(1);//ms delay 
} 
for(i=0;i<100;i++)// output a frequency sound
{ 
digitalWrite(buzzer,HIGH);// sound
digitalWrite(buzzer,LOW);//not sound
delay(2);//2ms delay 
}
} 
} 

After downloading the program, buzzer experiment is finished.

Resources

Video

http://www.keyestudio.com/wp/2016/05/ks0019-keyestudio-passive-buzzer-module/

Datasheet

https://drive.google.com/open?id=1al1MJhVE6ObEOGmsg31O0NANxWcITDP2

Buy from

Official Website

http://www.keyestudio.com/keyestudio-passive-buzzer-module.html

Amazon Store

https://www.amazon.com/Keyestudio-Passive-Buzzer-Arduino-raspberry/dp/B016ZRVP0K/ref=sr_1_fkmr0_1?s=industrial&ie=UTF8&qid=1487053757&sr=8-1-fkmr0&keywords=keyestudio+Passive+Buzzer+Module