Ks0289 keyestudio LCD2004 3D Module: Difference between revisions
Jump to navigation
Jump to search
Keyestudio (talk | contribs) (Created page with "== keyestudio LCD2004 3D Module== == Introduction == Keyestudio LCD2004 3D module includes a SD card reader, a rotary encoder and a 20 character * 4 line LCD. <br> Whe...") |
Keyestudio (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
== keyestudio LCD2004 3D Module== | == keyestudio LCD2004 3D Module== | ||
<br>[[File:Ks0289.png|500px|frameless|thumb]]<br> | |||
== Introduction == | == Introduction == | ||
Keyestudio LCD2004 3D module includes a SD card reader, a rotary encoder and a 20 character * 4 line LCD. | Keyestudio LCD2004 3D module includes a SD card reader, a rotary encoder and a 20 character * 4 line LCD. <br> | ||
When this control panel is connected to RAMPS 1.4, you don’t need your PC anymore. The smart control panel supplies power for your SD card. Further more actions like calibration, axes movements can be done by adjusting the rotary encoder on the Smart Control panel. With g-code design stored on the SD card, you can print your 3D designs without PC. | When this control panel is connected to RAMPS 1.4, you don’t need your PC anymore. The smart control panel supplies power for your SD card. Further more actions like calibration, axes movements can be done by adjusting the rotary encoder on the Smart Control panel. With g-code design stored on the SD card, you can print your 3D designs without PC. | ||
<br>[[File:KS0289 (1).jpg|500px|frameless|thumb]]<br> | |||
==Shipping List== | ==Shipping List== | ||
| Line 10: | Line 12: | ||
== Test Result == | == Test Result == | ||
<br>[[File:KS0289 (5).jpg|500px|frameless|thumb]]<br> | |||
== Resources == | == Resources == | ||
Revision as of 09:08, 6 December 2017
keyestudio LCD2004 3D Module
Introduction
Keyestudio LCD2004 3D module includes a SD card reader, a rotary encoder and a 20 character * 4 line LCD.
When this control panel is connected to RAMPS 1.4, you don’t need your PC anymore. The smart control panel supplies power for your SD card. Further more actions like calibration, axes movements can be done by adjusting the rotary encoder on the Smart Control panel. With g-code design stored on the SD card, you can print your 3D designs without PC.
.jpg)
Shipping List
- keyestudio LCD2004 3D module * 1
- Ribbon Cable * 2
Test Result
.jpg)
Resources
Datasheet:
https://drive.google.com/open?id=1YW8pymUovQkHgzb1kHHPhbfk8wukKfyn
Marlin Package:
https://drive.google.com/open?id=1_GKB8-1U_05483OIRj0NfAjRvZ9FP6NJ