Ks0100 keyestudio EASY plug White LED Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:




Line 33: Line 32:
<br>
<br>
== Upload the Code ==
== Upload the Code ==
Copy and paste below code to Arduino IDE and upload.   <br>
Below is an example code for LED blinking.
 
<br>[[File:ks0397 2.2.png|500px|frameless|thumb]]<br>
<pre>
int led = 9;
void setup()
{
pinMode(led, OUTPUT);//Set Pin9 as output
}
void loop()
{
digitalWrite(led, HIGH);//Turn led on
delay(1000);
digitalWrite(led, LOW);//Turn led off
delay(1000);
}
</pre>


<br>
<br>
Line 55: Line 40:
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.  <br>
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.  <br>
<br>[[File:Ks0100-1-1.png|500px|frameless|thumb]]<br>
<br>[[File:Ks0100-1-1.png|500px|frameless|thumb]]<br>


<br>
<br>
==Resources ==
==Resources ==
'''Download the PDF and Code:'''<br>
'''Download the Arduino Code and PDF:'''<br>
https://drive.google.com/open?id=1LcNJH98qIrB9dRE167_HNLJIhyC5q6is
https://drive.google.com/open?id=1LcNJH98qIrB9dRE167_HNLJIhyC5q6is
'''Download the Mixly Code and PDF:'''<br>




Revision as of 10:29, 6 May 2019


Keyestudio EASY plug White LED Module


Introduction

This is a special EASY plug white LED module. When connecting to ARDUINO, after programming, it can emit white light.
For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0
You should connect the LED module to control board for communication using an RJ11 cable.
You can combine with other sensors to do various interactive experiments.
You can also choose other LED modules to emit different light color like blue, green, yellow and red.


Features

  • Interface: Easy plug
  • Sensor type: Digital
  • Working voltage: 5V
  • LED color: white
  • Easy to use
  • Useful for light projects


Technical Details

  • Dimensions: 34mm*20mm*18mm
  • Weight: 3.8g


Connect It Up

Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.

thumb


Upload the Code

Below is an example code for LED blinking.
thumb


What You Should See

The LED will flash on for one second, then off for one second.
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.

thumb



Resources

Download the Arduino Code and PDF:
https://drive.google.com/open?id=1LcNJH98qIrB9dRE167_HNLJIhyC5q6is

Download the Mixly Code and PDF:



Buy from

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0100_keyestudio_EASY_plug_White_LED_Module&oldid=17167"