Ks0130 keyestudio EASY plug DS3231 Clock Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
Line 16: Line 16:
* Supply voltage: 3.3V to 5.5V
* Supply voltage: 3.3V to 5.5V
* Output Level: TTL level
* Output Level: TTL level
<br>
<br>
==Technical Details==
==Technical Details==
* Dimensions: 38mm*20mm*18mm
* Dimensions: 38mm*20mm*18mm
* Weight: 5.4g
* Weight: 5.4g
<br>
<br>
==Connect It Up==
==Connect It Up==
Line 27: Line 29:
<br>
<br>
==Upload the Code==
==Upload the Code==
Copy and paste below code to [http://wiki.keyestudio.com/index.php/How_to_Download_Arduino_IDE Arduino IDE] and upload.
Below is an example code. Open or drag below code to [https://wiki.keyestudio.com/Getting_Started_with_Mixly  Mixly Blocks] and upload. <br>
<pre>
<br>[[File:ks0398 21.png|500px|frameless|thumb]]<br>
#include <Wire.h>   // place file “Wire.h” under the directory “libraries” of Arduino
#include "DS3231.h"  // place file “DS3231.h” under the directory “libraries” of Arduino
DS3231 RTC;//Create the DS3231 object
char weekDay[][4] = {"Sun","Mon","Tue","Wed","Thu","Fri","Sat"};
//year, month, date, hour, min, sec and week-day(starts from 0 and goes to 6)
//writing any non-existent time-data may interfere with normal operation of the RTC.
//Take care of week-day also.
DateTime dt(2018,11,16,10,25,33,3);//open the series port and you can check time here or make a change to the time as needed.
void setup ()
{ Serial.begin(57600);//set baud rate to 57600
Wire.begin();
RTC.begin();
RTC.adjust(dt);//Adjust date-time as defined 'dt' above
}
void loop ()
{ DateTime now=RTC.now();//get the current date-time
Serial.print(now.year(),DEC);
Serial.print('/');
Serial.print(now.month(),DEC);
Serial.print('/');
Serial.print(now.date(),DEC);
Serial.print(' ');
Serial.print(now.hour(),DEC);
Serial.print(':');
Serial.print(now.minute(),DEC);
Serial.print(':');
Serial.print(now.second(),DEC);
Serial.println();
Serial.print(weekDay[now.dayOfWeek()]);
Serial.println();
delay(1000);
}
</pre>


<br>
<br>
==What You Should See==
==What You Should See==
Done uploading the code, open the serial monitor and set the baud rate to 57600, you should be able to see the time and the date.  
<br>[[File:ks0398 21-2.png|500px|frameless|thumb]]<br>
<br>[[File:ks0130 Result.png|600px|frameless|thumb]]<br>
<br>
 
Done uploading the code, open the serial monitor and set the baud rate to 9600, you should be able to see the date and the time.
<br>[[File:ks0398 21-3.png|500px|frameless|thumb]]<br>
<br>
<br>
<br>


==Resources ==
==Resources ==
'''Download the PDF:'''<br>
'''Download the Arduino information here:'''<br>
https://drive.google.com/open?id=1QHUXpcPLB87DfdQB7pMQLfJoHeO2pKnc
https://drive.google.com/open?id=14_xErD69oLBPfW1fuEMITKOFNhhUUf6H


'''Download the Code:'''<br>
'''Download the Mixly information here:'''<br>
https://drive.google.com/open?id=1SFRepat7htzNhVwQR3jZELI8zTY1KbL-
https://drive.google.com/open?id=1THNlIQlg4FcGfjq7OuDio5RQdN6JUSZr
 
'''Download the libraries:'''<br>
https://drive.google.com/open?id=14qG5vrvvSsUhV2zIm2Doxmnzrp0onJju




<br>
<br>
==Buy from ==
==Buy from ==
*'''Official Website:''' http://www.keyestudio.com/ks0130.html
*[https://www.keyestudio.com/newkeyestudio-easy-plug-ds3231-clock-module-for-arduino-steam-p0097-p0097.html '''Official Website''' ]


*[https://www.aliexpress.com/store/product/New-Keyestudio-EASY-plug-DS3231-Clock-Module-for-arduino/1452162_32643881814.html?spm=2114.12010612.8148356.8.274657f6NrgpUc  Shop on aliexpress ]
*[https://www.aliexpress.com/store/product/New-Keyestudio-EASY-plug-DS3231-Clock-Module-for-arduino/1452162_32643881814.html?spm=2114.12010612.8148356.8.274657f6NrgpUc  Shop on aliexpress ]

Revision as of 13:58, 7 May 2019

EASY plug DS3231 Clock Module

Introduction

The DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO) and crystal.
A real-time clock (RTC) is a computer clock (most often in the form of an integrated circuit) that keeps track of the current time.

It integrated with a battery input, which can maintain accurate timekeeping when power off. The integrated crystal resonator ensures the accuracy of clock. So this RTC solution should be worth to try.
Note: this module should be used together with EASY plug control board.

Specification

  • Temperature range: -40℃ to +85℃
  • Timing accuracy: about ± 5ppm
  • Output: 1Hz and 32.768kHz
  • High speed (400kHz), I2C serial bus
  • Supply voltage: 3.3V to 5.5V
  • Output Level: TTL level


Technical Details

  • Dimensions: 38mm*20mm*18mm
  • Weight: 5.4g


Connect It Up

Connect the EASY Plug DS3231 Clock module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
thumb


Upload the Code

Below is an example code. Open or drag below code to Mixly Blocks and upload.

thumb


What You Should See


thumb

Done uploading the code, open the serial monitor and set the baud rate to 9600, you should be able to see the date and the time.
thumb


Resources

Download the Arduino information here:
https://drive.google.com/open?id=14_xErD69oLBPfW1fuEMITKOFNhhUUf6H

Download the Mixly information here:
https://drive.google.com/open?id=1THNlIQlg4FcGfjq7OuDio5RQdN6JUSZr



Buy from

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0130_keyestudio_EASY_plug_DS3231_Clock_Module&oldid=17299"