Ks0257 keyestudio 2.8 Inch TFT LCD Shield: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
(Created page with "==keyestudio 2.8 Inch TFT LCD Shield== <br>500px|frameless|thumb<br> ==Introduction== This is a GPRS / GSM Arduino expansion boarddeveloped by Keyes. It i...")
 
Line 3: Line 3:


==Introduction==
==Introduction==
This is a GPRS / GSM Arduino expansion boarddeveloped by Keyes. It is a shield module with frequency of EGSM 900MHz / DCS 1800MHz and GSM850 MHz / PCS 1900MHz, integrated with GPRS, DTMF and other functions. It supports DTMF, when the DTMF function is enabled, you can get the character feedback from the conversion of button pressed down during the call, which can be used for remote control.<br>
This is a 2.8 inch TFT LCD touch shield with the drive chip of ILI9325, compatible with Arduino UNO R3. It is very easy and convenient for you to stack it on the top of Arduino UNO R3 when using it. The white button on the shield actually is the reset button.
It is controlled by the AT command, you can directlystart its function through the computer serial port and Arduino motherboard. The SIM800C GPRS Shield board has abuilt-in SIM800H chip with good stability.<br>


==Specification==
==Specification==

Revision as of 14:21, 14 September 2017

keyestudio 2.8 Inch TFT LCD Shield


thumb

Introduction

This is a 2.8 inch TFT LCD touch shield with the drive chip of ILI9325, compatible with Arduino UNO R3. It is very easy and convenient for you to stack it on the top of Arduino UNO R3 when using it. The white button on the shield actually is the reset button.

Specification

Resources

Datasheet
PDF


Get One Now

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0257_keyestudio_2.8_Inch_TFT_LCD_Shield&oldid=4113"