Ks0055 keyestudio Bluetooth Module

Bluetooth Module

Introduction

This Bluetooth module can easily achieve serial wireless data transmission. Its operating frequency is among the most popular 2.4GHz ISM frequency band (i.e. Industrial, scientific and medical). It adopts Bluetooth 2.1+EDR standard. In Bluetooth 2.1, signal transmit time of different devices stands at a 0.5 seconds interval so that the workload of bluetooth chip can be reduced substantially and more sleeping time can be saved for bluetooth. This module is set with serial interface, which is easy-to-use and simplifying overall design/development cycle.

Specification

• Bluetooth protocol: Bluetooth 2.1+ EDR standard
• USB protocol: USB v1.1/2.0
• Operating frequency: 2.4GHz ISM frequency band
• Modulation mode: Gauss frequency Shift Keying
• Transmit power: ≤ 4dBm, second stage
• Sensitivity: ≤-84dBm at 0.1% Bit Error Rate
• Transmission speed: 2.1Mbps(Max)/160 kbps(Asynchronous)； 1Mbps/1Mbps(Synchronous)
• Safety feature: Authentication and encryption
• Supported configuration: Bluetooth serial port (major and minor)
• Supply Voltage: +3.3 VDC 50mA
• Operating temperature: -20 to 55℃
• Size: 36.5*16mm
• Weight: 4g

Connection Diagram

Sample Code

int val; 
int ledpin=13; 
void setup() 
{ 
Serial.begin(9600);
 pinMode(ledpin,OUTPUT); 
} void loop()
{ val=Serial.read(); 
if(val=='a')
 { 
digitalWrite(ledpin,HIGH); 
delay(250); 
digitalWrite(ledpin,LOW); 
delay(250);
 Serial.println("keyestudio");
}
}

Resources

Video

http://www.keyestudio.com/wp/2016/05/ks0055-keyestudio-bluetooth-module/

PDF

https://drive.google.com/open?id=1bGxY5oCKknXInkW7BSbOIT7YBBhFyN8C

Buy from

Official Website

http://www.keyestudio.com/keyestudio-bluetooth-module-for-arduino.html

Amazon Store

https://www.amazon.com/Keyestudio-Bluetooth-Module-Arduino-raspberry/dp/B0177W7Z9M/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1487054061&sr=1-2-catcorr&keywords=keyestudio+Bluetooth+Module