Ks0109 keyestudio EASY plug Analog Rotation Sensor

EASY plug Analog Rotation Sensor

Introduction

This analog Rotation Sensor is arduino compatible. It is based on a potentiometer. Its voltage can be subdivided into 1024, easy to be connected to Arduino with our sensor shield. Combined with other sensors, we can make interesting projects by reading the analog value from the IO port.
Note: this module needs to be used together with EASY plug control board.

Specification

• Interface: Easy plug
• Supply Voltage: 3.3V to 5V
• Sensor type: Analog
• Size: 39*20mm
• Weight: 10g

Connection Diagram

Sample Code

///Arduino Sample Code
void setup()
{
 Serial.begin(9600); //Set serial baud rate to 9600 bps
}
void loop()
{
int val;
val=analogRead(3);//Read rotation sensor value from analog 3
Serial.println(val,DEC);//Print the value to serial port
delay(100);
}

Resources

PDF

https://drive.google.com/open?id=169UqNryrMv81-xdycY1BE3auMBY9RRCU

Buy from

Official Website

http://www.keyestudio.com/keyestudio-easy-plug-analog-rotation-sensor-module-for-arduino.html