Ks0247 keyestudio Pro Mini

Introduction

The processing center of keyestudio pro mini is Atmega328.It has 14 digital input/output pins (6 of which can be PWM output), 8 analog inputs, a 16MHz resonator, a reset button, mounting holes and pins.

Specification

• Fourteen digital input/output ports;

• Eight analog input ports A0 ~ A7;

• One pair of TTL level serial port RX/TX;

• Six PWM ports, D3, D5, D6, D9, D10, D11

• Using Atmel atmega328p-AU Uno

• Support external 7-9V Dc power supply

Special Instructions

The keyestudio pro mini burning program requires the external USB serial port module, such as FT232 module. The wiring method is as the following table.

Keyestudio pro mini	FT232 module
GND	GND
VCC	5V
RXD	TXD
TXD	RXD
DTR	DTR

Resources

Datasheet:
https://drive.google.com/open?id=1J6BoIDUtpB2L10VZ2VbAk7shAezlXyMy

Get One Now

Official Website

http://www.keyestudio.com/keyestudio-pro-mini.html