Ks0289 keyestudio LCD2004 3D Module

From Keyestudio Wiki
Revision as of 15:25, 7 January 2021 by Keyestudio (talk | contribs) (→‎Resources)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Introduction

Keyestudio LCD2004 3D module includes a SD card reader, a rotary encoder and a 20 character * 4 line LCD.
When this control panel is connected to RAMPS 1.4, you don’t need your PC anymore. The smart control panel supplies power for your SD card.
Further more actions like calibration, axes movements can be done by adjusting the rotary encoder on the Smart Control panel. With g-code design stored on the SD card, you can print your 3D designs without PC.

thumb


Shipping List

  • keyestudio LCD2004 3D module * 1
  • Ribbon Cable * 2


thumb


Example Test

Connect the LCD 2004 3D module to RAMPS 1.4 control board, after programming the MEGA 2560, the LCD screen will pop up the test data.

thumb


Resources

  • Marlin Package:

https://fs.keyestudio.com/KS0289


Buy From

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0289_keyestudio_LCD2004_3D_Module&oldid=30627"