Ks0224 keyestudio EASY plug Red LED Module

Keyestudio EASY plug Red LED Module

Introduction

This is a special EASY plug red LED module. When connecting to ARDUINO, after programming, it can emit red light.
For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0 You should connect the LED module to control board for communication using an RJ11 cable.
You can combine with other sensors to do various interactive experiments. You can also choose other LED modules to emit different light color like blue, green, yellow and white.

Special Note:
The sensor/module is equipped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface.
If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has different internal line sequence, can’t be used compatibly with our sensor/module.

Features

Interface: Easy plug
Sensor type: Digital
Working voltage: 5V
LED color: red
Easy to use
Useful for light projects

Technical Details

Dimensions: 34mm*20mm*18mm
Weight: 3.8g

Connect It Up

Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.

Upload the Code

Below is an example code for LED blinking. Open or drag below code to Mixly Blocks and upload.

What You Should See

The LED will flash on for one second, then blink off for one second.

If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.