Ks0418 Keyestudio micro:bit 5050 RGB Module

From Keyestudio Wiki
Revision as of 11:26, 4 March 2021 by Keyestudio (talk | contribs) (→‎Resources)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
keyestudio 5050 RGB Module For BBC micro:bit


Description

This module mainly contains a 5050 RGB LED, fully compatible with micro:bit control board.
When using, connect the RGB module to micro:bit control board using Crocodile clip line.
There are total 6 rings on the module. Note that three V rings are connected. V ring for 3V; R G B ring is separately connected to signal pin (0 1 2) of micro:bit main board.
When three signal pins are LOW, module will gradually show red, green and blue light.

Technical Parameters

  • Working voltage: DC 3.0-3.3V
  • Control mode: active LOW(common anode)
  • Size: 31mm*27mm*3mm
  • Weight: 1.8g
  • Environmental attributes: ROHS


thumb


Connection Diagram

thumb


Source Code

thumb


Example Result

Connect well the module, then send the source code to the micro:bit main board. Powered on, the LED on the module will alternately flash red, blue and green light.
thumb

thumb


Resources

  • Download relevant datasheet and code:

https://fs.keyestudio.com/KS0418



Get One Now

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0418_Keyestudio_micro:bit_5050_RGB_Module&oldid=31302"