Ks0115 keyestudio EASY plug Digital Tilt Sensor Module
EASY plug Digital Tilt Sensor Module
Introduction
Tilt Sensor is a digital tilt switch. It can be used as a simple tilt sensor. Simply plug it to our IO/Sensor shield; you can make amazing interactive projects. With dedicated sensor shield and Arduino, you can achieve interesting and interactive work.
Note: this module needs to be used together with EASY plug control board.
Specification
- Interface: Easy plug
- Supply Voltage: 3.3V to 5V
- Sensor type: Digital
- Size: 39*20mm
- Weight: 5g
Connection Diagram
Sample Code
int ledPin = 13; // Connect LED to pin 13 int switcher = 10; // Connect Tilt sensor to Pin10 void setup() { pinMode(ledPin, OUTPUT); // Set digital pin 13 to output mode pinMode(switcher, INPUT); // Set digital pin 10 to input mode } void loop() { if(digitalRead(switcher)==HIGH) //Read sensor value { digitalWrite(ledPin, HIGH); // Turn on LED when the sensor is tilted } else { digitalWrite(ledPin, LOW); // Turn off LED when the sensor is not triggered } }
Resources
https://drive.google.com/open?id=11zcE-Avm45q59CnFpU486L5WpoqgaPB9
Buy from
Official Website
http://www.keyestudio.com/keyestudio-easy-plug-digital-tilt-sensor-module-for-arduino-starter.html