Ks0241 keyestudio EASY plug L9110 Fire Extinguishing Module

From Keyestudio Wiki
Revision as of 13:30, 16 November 2017 by Keyestudio (talk | contribs) (→‎Buy from)
Jump to navigation Jump to search

EASY plug L9110 Fire Extinguishing Module


thumb

Introduction

EASY plug L9110 fire extinguishing module needs to match with the EASY plug Control board V2.0. The module is connected to the double digital port with only one line, which is very easy and convenient.
The module uses the L9110 driver to control the front and back rotation of the propeller, which can easily blow out the fire of a lighter far from 20cm.

thumb

Specification

  • Fan diameter: 75mm
  • Interface：double digital interface
  • Working voltage: 5V
  • Weight：14.0g


thumb

Connection Diagram


thumb

Sample Code

int INA = 3;  
int INB = 4;
void setup() 
{ 
pinMode(INA,OUTPUT); 
pinMode(INB,OUTPUT); 
} 
void loop() 
{ 
analogWrite(INA, 255);
digitalWrite(INB,LOW); 
delay(5000);
digitalWrite(INA,LOW);
digitalWrite(INB,LOW); 
delay(200); 
digitalWrite(INA,LOW);
analogWrite(INB, 255);
delay(5000); 
digitalWrite(INA,LOW);
digitalWrite(INB,LOW); 
delay(200); 
}

Resources

Datasheet：
https://drive.google.com/open?id=199INIYmbgB3NJcQpzHixALOJCGaffobs

Buy from

Official Website

http://www.keyestudio.com/easy-plug-l9110-fire-extinguishing-module.html

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0241_keyestudio_EASY_plug_L9110_Fire_Extinguishing_Module&oldid=5636"