KS0419 keyestudio micro:bit Tactile Button Module

From Keyestudio Wiki
Revision as of 13:26, 4 April 2019 by Keyestudio (talk | contribs)
Jump to navigation Jump to search
keyestudio Tactile Button Module For BBC micro:bit


Description

This keyestudio tactile button module is fully compatible with micro:bit control board. It mainly uses a button element, which is a digital signal output device.
When using, connect the module to micro:bit control board using Crocodile clip line.
There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are connected. G for ground; V for 3V; S for signal pin(0 1 2).
When press the button, the signal end of micro:bit main board will input HIGH level signal.

Technical Parameters

  • Working voltage: DC 3.0-3.3V
  • Output Signal: Digital
  • Dimensions: 31mm*27mm*6.5mm
  • Weight: 1.8g
  • Environmental attributes: ROHS


thumb


Connection Diagram

thumb


Source Code

thumb


Example Result

Connect well the module, then send the source code to the micro:bit main board. Powered on, press the button, the micro:bit main board will show icons.
thumb


Resources

Download all relevant info. below:



Retrieved from "http://wiki.keyestudio.com/index.php?title=KS0419_keyestudio_micro:bit_Tactile_Button_Module&oldid=15659"