Ks0019 keyestudio Passive Buzzer module

From Keyestudio Wiki
Jump to navigation Jump to search

Passive Buzzer Module


thumb


Introduction

We can use Arduino to make many interactive works of which the most commonly used is acoustic-optic display.
The circuit in this experiment can produce sound. Normally, the experiment is done with a buzzer or a speaker while buzzer is simpler and easier to use.
The buzzer we introduced here is a passive buzzer. It cannot be actuated by itself, but by external pulse frequencies. Different frequencies produce different sounds.
We can use Arduino to code the melody of a song, which is quite fun and simple.


Specification

  • Working voltage: 3.3-5v
  • Interface type: digital


Connection Diagram


thumb


Sample Code

int buzzer=8;//set digital IO pin of the buzzer
void setup() 
{ 
pinMode(buzzer,OUTPUT);// set digital IO pin pattern, OUTPUT to be output 
} 
void loop() 
{ unsigned char i,j;//define variable
while(1) 
{ for(i=0;i<80;i++)// output a frequency sound
{ digitalWrite(buzzer,HIGH);// sound
delay(1);//delay1ms 
digitalWrite(buzzer,LOW);//not sound
delay(1);//ms delay 
} 
for(i=0;i<100;i++)// output a frequency sound
{ 
digitalWrite(buzzer,HIGH);// sound
digitalWrite(buzzer,LOW);//not sound
delay(2);//2ms delay 
}
} 
}


After downloading the program, buzzer experiment is complete. You should hear the buzzer ringing.
thumb



Resources

  • Video

http://video.keyestudio.com/ks0019/

  • Datasheet

https://drive.google.com/open?id=1al1MJhVE6ObEOGmsg31O0NANxWcITDP2


Buy from

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0019_keyestudio_Passive_Buzzer_module&oldid=15818"