KS0549 Keyestudio DIY Electronic Watering Kit
Description
As for some plants lovers, they are keen on spending time in caring for their plants. Yet if they are busy in your work or entertainments, plants may wither by virtue of lacking water. To avoid this, we launched an automatic watering device with four humidity sensors and a water pump. It can water four plants pots. An equipped display screen can show the humidity value of soil.
Parameters
- Working voltage: 5V
- External power supply: DC 6-15V (recommended 9V)
- DC output capability per I/O: 10 mA
- 3.3V port output: 150 mA max
- Size: 68*51*11mm3
- Weight: 22.5g
Wiring Diagram
Project
Control relay modules and water pumps
4.1 Control relay modules and water pumps
Parameters：
- Working voltage 2.5V~6V
- The inner diameter of a water pipe is 6mm
- When voltage is 5V, the height of the water pipe from the pump cannot be higher than 105cm
Description
The relay is an electric switch, and the water pump is a power device. We can pump water by the relay switch.
Test Code
#define IN1 3
#define IN2 5
#define IN3 6
#define IN4 9
void setup() {
pinMode(IN1, OUTPUT);
pinMode(IN2, OUTPUT);
pinMode(IN3, OUTPUT);
pinMode(IN4, OUTPUT);
}
void loop() {
digitalWrite(IN1, HIGH);
digitalWrite(IN2, HIGH);
digitalWrite(IN3, HIGH);
digitalWrite(IN4, HIGH);
delay(3000);
digitalWrite(IN4, LOW);
digitalWrite(IN3, LOW);
digitalWrite(IN2, LOW);
digitalWrite(IN1, LOW);
delay(1000);
}