Ks0062 keyestudio I2C LCD2004 Module
I2C LCD2004 Module
Introduction
keyestudio 2004 I2C Module is a 20 character by 2 line LCD display with Blue background and White backlight. The original 2004 LCD needs 7 IO ports to be up and running, ours is built with Arduino IIC/I2C interface, saving you 5 IO ports. This LCD is ready-to-use because it is compatible with the Arduino Liquid Crystal Library.
Specification
- Interface: I2C
- I2C address: 0x27
- Operating voltage: +5V
- Size: 27.7mm×42.6mm
- Contrast control: via potentiometer
Connection Diagram
This module carries I2C interface, so we need to comply with I2C protocol in usage and corresponding head files must be included and added into the library.
Below is the connection diagram between this module and Arduino controller:
Sample Code
//YWROBOT
//Compatible with the Arduino IDE 1.0
//Library version:1.1
#include <Wire.h>
#include <LiquidCrystal_I2C.h>
LiquidCrystal_I2C lcd(0x27,20,4); // set the LCD address to 0x27 for a 16 chars and 2 line display
void setup()
{
lcd.init(); // initialize the lcd
lcd.init();
// Print a message to the LCD.
lcd.backlight();
lcd.setCursor(3,0);
lcd.print("Hello, world!");
lcd.setCursor(2,1);
lcd.print("Hello，keyestudio!");
lcd.setCursor(0,2);
lcd.print("Arduino LCM IIC 2004");
lcd.setCursor(2,3);
lcd.print("Power By Ec-yuan!");
}
void loop()
{
}
Note: To ensure that this module will work properly, these two head files, namely Wire and LiquidCrystal_I2C, must be added into our library before code compiling.
Resources
Get the Libraries of Wire and LiquidCrystal_I2C
https://drive.google.com/open?id=1EHUG03O9-sJnvQpwGRvJARRH6BV5hucL
Video
http://www.keyestudio.com/wp/2016/05/ks0062-keyestudio-2004-i2c-lcd-module/
https://drive.google.com/open?id=10MtZMwdldXwi1ktYcsJsYgZsr6iC4l4c
Buy from
Official Website
http://www.keyestudio.com/keyestudio-i2c-lcd2004-module-for-arduino.html
Amazon Store