Ks0126 keyestudio EASY plug IR Transmitter Module

From Keyestudio Wiki
Jump to navigation Jump to search

EASY plug IR Transmitter Module


thumb

Introduction

Infrared transmitting tube, also known as infrared emitting diode, belongs to the diode family. It is a light-emitting device that can directly convert electrical energy to near-infrared light and emit. Its structure and principle is similar to an LED. Only material of semiconductor is different. This module is usually used together with IR receiver module.
Note: this module needs to be used together with EASY plug control board.


Specification

  • Interface: Easy plug
  • Power Supply: 3-5V
  • Infrared center frequency: 850nm-940nm
  • Infrared emission angle: about 20degree
  • Infrared emission distance: about 1.3m (5V 38Khz)
  • Interface socket: JST PH2.0
  • Mounting hole: inner diameter is 3.2mm, spacing is 15mm
  • Size: 43.8*20mm
  • Weight: 5g


Connection Diagram


thumb


Sample Code

#include <IRremote.h>
IRsend irsend;
void setup()
{
Serial.begin(9600);
}
void loop() {
irsend.sendSony(0xa90, 12); // Sony TV power code
delay(100);
}

Download the libraries of IRremote: [1]

Resources

PDF

https://drive.google.com/open?id=1UkrRZFxKu2A4CUS_Ug_-hyh4U4c77B2m

Libraries

https://drive.google.com/open?id=1BO7P-o_OBoNzO2CLI4YiMHB-jRMrPgDI

Buy from

Official Website

http://www.keyestudio.com/keyestudio-easy-plug-ir-transmitter-module-for-arduino-starter.html

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0126_keyestudio_EASY_plug_IR_Transmitter_Module&oldid=12724"