Ks0234 keyestudio Yellow LED Module

From Keyestudio Wiki
Revision as of 17:07, 15 March 2019 by Keyestudio (talk | contribs) (Created page with "==Introduction== This is a yellow LED module. The main function is to control a plugin LED on and off. When connecting to ARDUINO, after programming, it will emit yellow ligh...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

This is a yellow LED module. The main function is to control a plugin LED on and off. When connecting to ARDUINO, after programming, it will emit yellow light color. The pin pitch of 3Pin is 2.54mm. This LED module has 3 Pins; - pin is connected to ground, + pin is connected to VCC（3.3-5V）, S pin is for signal control; you can set the High or Low level to control the LED on and off. You can combine with other sensors to do various interactive experiments. You can also choose other LED modules to emit different light color like blue, white, green and red.

Features

 Control interface: Digital  Working voltage: DC 3.3-5V  Pin pitch: 2.54mm  LED color: yellow  Easy to use  Useful for light projects

Connect It Up

Connect the LED module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0234_keyestudio_Yellow_LED_Module&oldid=15322"