KS0419 keyestudio micro:bit Tactile Button Module
Revision as of 17:27, 15 March 2019 by Keyestudio (talk | contribs) (Created page with "This keyestudio tactile button module is fully compatible with micro:bit control board. When using, connect the module to micro:bit control board using Crocodile clip line....")
This keyestudio tactile button module is fully compatible with micro:bit control board. When using, connect the module to micro:bit control board using Crocodile clip line. It mainly uses a button element, which is a digital signal output device. There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are connected. G for ground; V for 3V; S for signal pin(0 1 2). When press the button, the signal end of micro:bit main board will input HIGH level signal.