Ks0420 Keyestudio micro:bit Capacitive Touch Module
Revision as of 17:30, 15 March 2019 by Keyestudio (talk | contribs) (Created page with "This keyestudio capacitive touch module is fully compatible with micro:bit control board. When using, connect the module to micro:bit control board using Crocodile clip line...")
This keyestudio capacitive touch module is fully compatible with micro:bit control board. When using, connect the module to micro:bit control board using Crocodile clip line. It mainly uses touch detection IC, which is a digital signal output device. It can be used for waterproof appliances, key replacements, etc. There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are connected. G for ground; V for 3V; S for signal pin(0 1 2). When touch the sensing area, input HIGH level signal to micro:bit signal end, LED on the module will turn on; or else, turn off.