Ks0226 keyestudio EASY plug Yellow LED Module
Introduction
This is a special EASY plug yellow LED module. When connecting to ARDUINO, after programming, it can emit yellow light.
For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0
You should connect the LED module to control board for communication using an RJ11 cable.
You can combine with other sensors to do various interactive experiments.
You can also choose other LED modules to emit different light color like blue, red, green and white.
Features
- Interface: Easy plug
- Sensor type: Digital
- Working voltage: 5V
- LED color: yellow
- Easy to use
- Useful for light projects
Technical Details
- Dimensions: 34mm*20mm*18mm
- Weight: 3.8g
Connect It Up
Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
Upload the Code
Below is an example code for LED blinking. Open or drag below code to Mixly Blocks and upload.
What You Should See
The LED will flash on for one second, then blink off for one second.
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.
Little Knowledge:
If you want to make the LED flash on and off more quickly or slowly, you can modify the Delay time here.
Resources
Download the Arduino Code:
https://drive.google.com/open?id=1C7MkvwE052i3dmMCymFvozMadzyjK6_0
Download the Mixly Code and datasheet:
https://drive.google.com/open?id=13x92dDwyjX5Omxl8yS6y0tZZC8swnegg