Ks0158 Keyestudio EASY plug starter kit for Arduino

EASY plug learning kit for Arduino starters

EASY plug starter kit for Arduino
Based on open-source hardware
19 various sensors in one box
For you to make interesting projects

Summary

What about you and your kids being makers? What about getting creative and making your ideas come true? Well, let's get started right away!
EASY plug learning kit is developed not only for professional electronic enthusiasts, but also for friends in other lines of work. Even if you have no electronics related knowledge, you can use it to realize your ideas as long as you want to.
The tutorial of this kit has fully considered the learning interest of beginners. Starting from the basics to more complex lessons, well-arranged content and a connection diagram for every lesson help you get started easily and quickly in learning Arduino.
Its unique EASY plug interface makes the wire connection easier than ever! You never have to worry about wrong connection or complicated soldering, avoiding component damage due to wrong wiring or wrong soldering. It's both safe and environmental-friendly.

Kit List

No.	Product Name	Quantity	Picture
1	EASY plug controller Board	1
2	Acrylic Board + Copper bush set	1
3	EASY plug cable	3
4	USB cable	1
5	EASY plug Digital White LED Module	3
6	EASY plug Active Buzzer Module	1
7	EASY plug Passive Buzzer Module	1
8	EASY plug Analog Temperature Sensor	1
9	EASY plug Analog Sound Sensor	1
10	EASY plug Photocell Sensor	1
11	EASY plug Water Sensor	1
12	EASY plug Soil humidity Sensor	1
13	EASY plug Analog Rotation Sensor	1
14	EASY plug Hall Magnetic Sensor	1
15	EASY plug Collision Sensor	1
16	EASY plug Digital Push Button	1
17	EASY plug Capacitive Touch Sensor	1
18	EASY plug Knock Sensor	1
19	EASY plug Digital Tilt Sensor	1
20	EASY plug Flame Sensor	1
21	EASY plug Vibration Sensor	1
22	EASY plug Reed Switch Module	1
23	EASY plug LM35 Temperature Sensor	1

Lesson List

1.Hello world
2.Who's blinking
3.Visible breath
4.Flowing light
5.Make a sound
6.Who's singing
7.Temperature measuring
8.Make a sound-controlled lamp
9.Make a light-controlled lamp
10.Water level alarm
11.I'm thirsty
12.Visible analog value
13.Magnetic field detecting
14.Collision detecting
15.Button-controlled lamp
16.Touch alarm
17.Knock Sensing
18.Tilt Sensor
19.Fire alarm
20.Vibration alarm
21.Magnetic field detector
22.Temperature alarm

Lesson Details

Lesson 1: Hello world

Introduction

For the first lesson, we will begin with something simple. This lesson is called "Hello World!". This is a communication test of your Arduino and PC, also a primer project for you to have your first try of the Arduino world!

Hardware required

EASY plug controller Board *1
USB cable *1

Sample Code

Connect the board to your PC using the USB cable; copy below code into Arduino IDE, and click upload to upload it to your board.

int val;// define variable val
void setup()
{
  Serial.begin(9600);// set the baud rate at 9600 to match the software settings. When connected to a specific device, (e.g. Bluetooth), the baud rate needs to be the same with it.
}
void loop()
{
  val=Serial.read();// read the instruction or character from PC to Arduino, and assign them to Val.
  if(val=='R')//  determine if the instruction or character received is “R”
  {  // if it’s “R”
   Serial.println("Hello World!");// display “Hello World!”
  }
}

Result

Open serial port monitor of the Arduino IDE, input “R”, click “Send”, you can see it displays “Hello World!”.