Ks0020 keyestudio Hall Magnetic Sensor

Hall Magnetic Sensor

Introduction

This is a Magnetic Induction Sensor. It senses the magnetic materials within a detection range up to 3cm. The detection range and the strength of the magnetic field are proportional. The output is digital on/off. This sensor uses the SFE Reed Switch - Magnetic Field Sensor.

Specification

• Sensing magnetic materials
• Detection range: up to 3cm
• Output: digital on/off
• Detection range and magnetic field strength are proportional
• Size: 30*20mm
• Weight: 3g

Connection Diagram

Sample Code

int ledPin = 13;                // choose the pin for the LED
int inputPin = 3;               // Connect sensor to input pin 3 
int val = 0;                    // variable for reading the pin status
 
void setup() {
  pinMode(ledPin, OUTPUT);      // declare LED as output
  pinMode(inputPin, INPUT);     // declare pushbutton as input
}
 
void loop(){
  val = digitalRead(inputPin);  // read input value
  if (val == HIGH) {            // check if the input is HIGH
    digitalWrite(ledPin, LOW);  // turn LED OFF
  } else {
    digitalWrite(ledPin, HIGH); // turn LED ON
  }
}

Resources

Video

http://www.keyestudio.com/wp/2016/05/ks0020-keyestudio-hall-megnatic-sensor/

Datasheet

http://www.keyestudio.com/files/index/download/id/1463649086/

Get One Now

http://www.keyestudio.com/keyestudio-hall-magnetic-sensor.html