KS4020(4021)Keyestudio EASY PLUG Super Starter Kit for BBC micro:bit STEM EDU
Description
Micro:bit is significantly applied to STEM education for teenagers, as a small microcontroller, which features small in size, easy to carry, and powerful function. At present, innovative technology products, like robots, wearable devices and interactive electronic games can be produced by programming and code.
MakeCode is a framework for creating interactive and engaging programming experiences for those new to the world of programming. The platform provides the foundation for a tailored coding experience to create and run user programs on actual hardware or in a simulated target.
To make you deeply know the micro:bit, we also provide test code and projects.
This super starter kit incorporates different sensors and modules such as passive buzzer, 1602 LCD module, RGB, crash sensor and so on. The detailed projects, from simple to difficult will spur your inspiration and bring in the magical programming world.
Kit List
Micro:bit
Install Drive of Micro:bit Board
1)First of all, connect the micro:bit to your computer using a USB cable.
And enter website https://fs.keyestudio.com/KS0426Driver to download the driver file of micro:bit, double-click ,
After downloading the driver, then click “Next”
The following page pops up and click“install”
Tap “Finish”. Then click“Computer”—>“Properties”—>“Device manager”, as shown below.
Code and Programming
Makecode
Browse https://makecode.microbit.org/ and enter Makecode online editor.
Click“New Project”, and input“heartbeat”,then enter Makecode editor, as shown below:
There are block “on start” and “forever” in the code editing area.
When plugging in power or resetting, “on start”means that command blocks in the code are only executed once, “forever”implies that code will runs cyclically.
Quick Download
Import Code
CoolTerm Installation
Projects
Please download the link to get more detailed projects