KS0543 (KS0543F) Keyestudio Beetlebot 3 in 1 Robot for Arduino STEM Education
Description:
The Beetlebot smart robot, compatible with LEGO building blocks, is a STEM educational product which can automatically dodge obstacles, follow black lines and light to move. Besides, it has three cool forms such as the soccer robot, the siege robot, the handling robot. As for beginners, they can create whatever they want by LEGO building blocks.
Various improvements have been made on the Beetlebot car in comparison with other smart cars. It integrates a motor driver and a large number of sensors and is easy to assemble. Going forward, not only can it impart basic programming knowledge and AI application to children and the youth, but also it can cultivate their creativity, hands-on ability, problem-solving capability, interpersonal communication as well as teamwork ability. With this kit, you have a chance to experience soccer games using your own robots.
Features
- Compatible with LEGO building blocks: generate diverse forms with LEGO blocks and sensors
- Three forms: a soccer robot, a siege engine, a handling robot
- Various functions: Pictures display, atmosphere light control, line tracking, obstacle avoidance, light following , IR control and WIFI control.
- Easy to build: embedded design on car body; wire up the car body with a few steps
- High compatibility: reserve ports for the Raspberry Pico board and the ESP32 control board
- Charging function: integrate a circuit for 18650 batteries, low-cost and effective
- WiFi Control: adopt WiFi control, can finish tailor-made software development
- App: compatible with Android and iOS systems, with aesthetic page and flexible control system
Specification:
- Working voltage: 5V
- Input voltage: 2.5V~4.2V (lithium battery)
- Maximum output current: 3A
- Maximum power consumption: 15W (T=80℃)
- Motor speed: 5V 200 rpm / min
- Motor drive form: dual H-bridge
- Ultrasonic sensing angle: <15 degrees
- Ultrasonic detection distance: 2cm-400cm
- IR control distance: about 7 meters (measured)
- Size: 176mm*137mm*130mm
- Environmental protection attributes: ROHS
Kit List:
# | Picture | Name | QTY |
---|---|---|---|
1 | Keyestudio Nano CH340 Development Board | 1 | |
2 | ESP8266 Wifi Module | 1 | |
3 | Keyestudio Photoresistor | 2 | |
4 | 270° Servo | 1 | |
5 | Keyestudio Development Board | 1 | |
6 | Keyestudio Driver Board | 1 | |
7 | LEGO Bulk Lot | 1 | |
8 | Acrylic Board | 1 | |
9 | MD0487 Acrylic Board for Ultrasonic Sensor | 1 | |
10 | Acrylic Board for Servo | 1 | |
11 | 4.5V 200R Motor | 2 | |
12 | 8*8 Dot Matrix Display | 1 | |
13 | Aluminum Block | 2 | |
14 | 9G 180°Servo | 1 | |
15 | Car Wheel | 2 | |
16 | HC-SR04 Ultrasonic Sensor | 1 | |
17 | Screwdriver | 1 | |
18 | W420 Universal Wheel | 1 | |
19 | Blue USB Cable | 1 | |
20 | JMFP-4 17-Key Remote Control | 1 | |
21 | Black USB Cable | 1 | |
22 | Screwdriver | 1 | |
23 | thumb | 3P F-F Dupont Wire | 2 |
24 | 4P F-F Dupont Wire | 1 | |
25 | HX2.54mm-4P Dupont Wire | 1 | |
26 | Winding Pipe | 1 | |
27 | 10P XH2.54 Dupont Wire | 1 | |
28 | Acrylic Gasket | 6 | |
29 | thumb | M3*40MM Dual Pass Copper Pillars | 4 |
30 | M1.2*5MM Round Head Screws | 6 | |
31 | M1.4 Nuts | 6 | |
32 | M1.4*10MM Round Head Screws | 6 | |
33 | M2 Nuts | 3 | |
34 | M2*8MM Round Head Screws | 3 | |
35 | M3*10MM Round Head Screws | 6 | |
36 | M3*6MM Round Head Screws | 9 | |
37 | M3 Nuts | 11 | |
38 | M3*30MM Round Head Screws | 9 | |
39 | Soccer Ball | 4 | |
40 | W1515 Universal Wheel | 1 | |
41 | 18650 BatteriesKS0543F includes batteries,KS0543 doesn't conclude batteries | 1 | |
42 | USB to ESP-01S WIFI Module Expansion Board | 1 |
Projects
Project 1: LED Blinking16
Description:
There is an onboard LED (L) on our Arduino Nano board connected to D13. In this experiment, we WILL make this LED blink. LED blinking is the most basic experimental project for Arduino enthusiasts. Let’s get started.