Ks0247 keyestudio Pro Mini
Introduction
The processing center of keyestudio pro mini is Atmega328.It has 14 digital input/output pins (6 of which can be PWM output), 8 analog inputs, a 16MHz resonator, a reset button, mounting holes and pins.
.jpg)
Specification
- Fourteen digital input/output ports;
- Eight analog input ports A0 ~ A7;
- One pair of TTL level serial port RX/TX;
- Six PWM ports, D3, D5, D6, D9, D10, D11
- Using Atmel atmega328p-AU Uno
- Support external 7-9V Dc power supply
Special Instructions
The keyestudio pro mini burning program requires the external USB serial port module, such as FT232 module. The wiring method is as the following table.
| Keyestudio pro mini | FT232 module |
|---|---|
| GND | GND |
| VCC | 5V |
| RXD | TXD |
| TXD | RXD |
| DTR | DTR |
Resources
Datasheet:
https://drive.google.com/open?id=1J6BoIDUtpB2L10VZ2VbAk7shAezlXyMy