Ks0033 keyestudio Analog Temperature Sensor
Introduction
This module is based on the working principle of a thermistor (resistance varies from temperature change in the environment). It can sense temperature change in its surrounding and send the data to the analog IO in the Arduino board. All we need to do is to convert the sensor output data into degrees Celsius temperature by simple programming, finally it will be displayed on the screen. It's both convenient and effective, and it’s widely applied in gardening, home alarm system and other devices.
Specification
- Interface Type: analog
- Working Voltage: 5V
- Temperature Range: -55℃～315℃
- Size: 30*20mm
- Weight: 3g
Connection Diagram
Sample Code
void setup()
{Serial.begin(9600);
}
// the loop routine runs over and over again forever:
void loop()
{int sensorValue = analogRead(A0);
Serial.println(sensorValue);
delay(1);
}
You can see that the analog value is changing according to the temperature change in the environment. But it’s not very obvious. Let’s solve it by using the following equation. The value read from the serial port is similar to normal temperature, eg. The temperature right now is 30C.
#include <math.h>
double Thermister(int RawADC) {
double Temp;
Temp = log(((10240000/RawADC) - 10000));
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp ))* Temp );
Temp = Temp - 273.15; // Convert Kelvin to Celcius
return Temp;
}
void setup()
{Serial.begin(9600);
} void loop() { Serial.print(Thermister(analogRead(0))); // display Fahrenheit Serial.println("c"); delay(500);
}
Resources
Video
http://www.keyestudio.com/wp/2016/05/ks0033-keyestudio-analog-temperature-sensor/
Datasheet
http://www.keyestudio.com/files/index/download/id/1463650241/
Buy from
Official Website
http://www.keyestudio.com/keyestudio-analog-temperature-sensor-for-arduino.html
Amazon Store