Download CH340 Driver on MAC System

From Keyestudio Wiki
Revision as of 13:58, 27 December 2022 by Keyestudio (talk | contribs) (→‎Installation)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Download CH340 driver:

https://fs.keyestudio.com/CH340-MAC

Supported Systems

OS X 10.9 to OS X 10.15
OS X 11.0(Big Sur) and above

Supported Chips

CH340/CH341/CH343/CH9101/CH9102/CH9143 (USB to Single Serial Port)
CH342/CH344/CH347/CH9103/CH9104 (USB to Multi Serial Ports)

Installation

Step 1: Download the driver from the Website and extract the file to the local installation directory.
QQ图片202212261.png

Step 2: For details about how to install the driver in pkg format by default, see Step 3. If OS X 11.0 or later does not support Rosetta, refer to Step 4 to install the dmg driver.
Before installation, please forward to “System Preferences”->“Security & Privacy”->“General” page, below the title “Allow apps downloaded from:” choose the choice 2->“Mac App Store and identified developers”, then the driver will work normally.

QQ图片20221232.png

Step 3: To install the driver in pkg format, tap the driver file → Continue→ Install

QQ图片2022122.png

QQ图片20221226083.png

Then the installation will be successful
QQ图片20221226084.png

QQ图片2022122605.png

To install the pkg format driver on OS X 11.0 and later: Open “LaunchPad”→“CH34xVCPDriver”→Install

QQ图片2022122606.png

When using OS X 10.9 to OS X 10.15, click “Restart” to restart your computer, and perform the following steps after the restart.

QQ图片20221226097.png

Step 4: To install the dmg driver, tap the dmg file and drag “CH34xVCPDriver” to enter the application folder in the operating system.

QQ图片2022122608.png

Then open “LaunchPad”→“CH34xVCPDriver”→Install

QQ图片202212269.png

Then the installation will be successful

QQ图片202212260910.png

When inserting the CH340 control board into the USB port, open System Report -> Hardware ->USB. On the right is USB Device Tree. If the USB device is working properly, you will find a device whose “Vendor ID” is [0x1a86].

QQ图片20221226011.png

Open “Terminal” program under Applications-Utilities folder and type the command “ls /dev/tty*”.

QQ图片202212271312.png
You should see the “tty.wchusbserialx” where “x” is the assigned device number similar to Windows COM port assignment.