Getting Started with keyestudio

From Keyestudio Wiki
Revision as of 11:10, 10 August 2016 by Keyestudio (talk | contribs) (Created page with "<br> 400px|frameless|thumb === '''0. Hello World''' === Generally, teacher will teach us to write a simple Hello World example when start to learn a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


thumb

0. Hello World

Generally, teacher will teach us to write a simple Hello World example when start to learn a programming language. This only a basic introductory,but it is a very important process. Although you are not familiar about Arduino, do not worry. You can learn the hello world about Arduino: light up a LED. Now we take keyestudio UNO R3 Board as an example to learn how to light up a LED which is controlled by Digital 13 Pin. Before doing this, please make sure that you have downloaded the Arduino Environment and installed the keyestudio UNO R3 Driver successfully.



1. Connect keyestudio UNO R3 Board to PC

Connect the keyestudio UNO R3 Board to your computer using the USB cable. The green power LED (labeled PWR) should go on.