How to Install the Driver of CP2102 on MAC System

From Keyestudio Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Connect board we provide to your computer, and open Arduino IDE



====9.png

Click Tools to select Board:Arduino Uno and /dev/cu.usbserial-0001


====10.png

Tap Upload to upload code, if burn successfully, you will view Done uploading.


====11.png

Note: If burn unsuccessfully, you need to install driver of CP2102, please continue to follow the instructions as below:

Download the driver of CP2102:

https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers


1.Select Mac OSX edition


====12.png

2.Unzip the downloaded package


====13.png

3.Open folder and double-click SiLabsUSBDriverDisk.dmg file.


====14.png


4.You will view the following files as follows:


====15.png


5. Double-click Install CP210x VCP Driver, tick Don’t warn me and tap Open


====16.png

6. Tap Continue


====17.png

7. Tap Continue and Agree


====18.png

8.Click Continue and input your password


====19.png

====20.png

9.Select Open Security Preferences


====21.png

10.Click the lock to unlock security & privacy preference.


====22.png


====23.png

11.Then click Allow


====24.png

12.Back to installation page, and wait to install.


====25.png

13.Successfully installed


====26.png

14.Then enter ArduinoIDE, click Tools and select Board: Arduino Uno and /dev/cu.SLAB_USBtoUAPT


====27.png

15.Click0486-23.png to upload code and you will see “Done uploading”.


====28.png

Retrieved from "http://wiki.keyestudio.com/index.php?title=How_to_Install_the_Driver_of_CP2102_on_MAC_System&oldid=29192"