KS0215 keyestudio RPI T-type GPIO Shield
Revision as of 15:12, 25 February 2018 by Keyestudio (talk | contribs) (Created page with " <br>500px|frameless|thumb<br> ==Introduction== This RPI T-type GPIO extension board is specifically designed for Raspberry Pi B+, helping you to connec...")
Introduction
This RPI T-type GPIO extension board is specifically designed for Raspberry Pi B+, helping you to connect external device on the breadboard. The T-Cobbler can be pluged into any solderless breadboard. The T-Cobbler PCB has all pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk.
Documents
File:
https://drive.google.com/open?id=1309GFYVPZwPOBOqR1904CCM0fNGei9kD
Buy From
http://www.keyestudio.com/keyestudio-rpi-t-shape-gpio-shield.html