KS0215 keyestudio RPI T-type GPIO Shield

From Keyestudio Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


thumb


Introduction

This RPI T-type GPIO extension board is specifically designed for Raspberry Pi B+, helping you to connect external device on the breadboard.
This board can be plugged into any solderless breadboard. The PCB has all pins labeled nicely, so you can directly build circuits without keeping a pin-out printout at your desk.

thumb


Example Use

You can easily plug RPI T-type GPIO extension board into breadboard, then use a ribbon cable to connect the board to your RPI.

thumb


Documents

https://fs.keyestudio.com/KS0215


Buy From

Retrieved from "http://wiki.keyestudio.com/index.php?title=KS0215_keyestudio_RPI_T-type_GPIO_Shield&oldid=32155"