KS0317 keyestudio Relay Module (Black and Environmental-friendly): Difference between revisions
Jump to navigation
Jump to search
Keyestudio (talk | contribs) (Created page with " == Keyestudio Relay Module(Black and Environmental-friendly) == <br>500px|frameless|thumb<br> == Overview == This is a button-controlled relay...") |
Keyestudio (talk | contribs) |
||
| (7 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
<br>[[File:KS0317 图片1.png| | <br>[[File:KS0317 图片1.png|600px|right|thumb| keyestudio Relay Module]]<br> | ||
<br> | |||
== Overview == | == Overview == | ||
This is a button-controlled relay module. It integrates a 12V relay. Powered on, you can control the relay on and off through a tactile button on the module. Or you can connect up the white connector on the module to replace the tactile button, so as to remotely control the relay on and off. | This is a button-controlled relay module. It integrates a 12V relay. <br> | ||
<br>[[File:KS0317 继电器模块 黑色 (8).jpg| | Powered on, you can control the relay on and off through a tactile button on the module. <br> | ||
Or you can connect up the white connector on the module to replace the tactile button, so as to remotely control the relay on and off. | |||
<br>[[File:KS0317 继电器模块 黑色 (8).jpg|600px|frameless|thumb]]<br> | |||
<br> | |||
== Features == | == Features == | ||
*Onboard comes with a 12V relay | *Onboard comes with a 12V relay | ||
| Line 13: | Line 16: | ||
*With four fixed holes, you can mount it on other devices | *With four fixed holes, you can mount it on other devices | ||
*Safe and environmental-friendly | *Safe and environmental-friendly | ||
<br>[[File:KS0317 继电器模块 黑色 (6).jpg|600px|frameless|thumb]]<br> | |||
<br> | <br> | ||
== Parameters == | == Parameters == | ||
* Operating voltage: DC 12V | * Operating voltage: DC 12V | ||
* Operating current: 30mA | * Operating current: 30mA | ||
<br> | |||
== Example Use == | == Example Use == | ||
Connect DC 12V voltage to DC+ and DC- terminal block on the relay, press down the button, relay is turned on, NO and COM terminals are connected, NC and COM terminals are disconnected. <br> | Connect DC 12V voltage to DC+ and DC- terminal block on the relay, press down the button, relay is turned on, NO and COM terminals are connected, NC and COM terminals are disconnected. <br> | ||
| Line 27: | Line 29: | ||
For example, we have supplied DC 12V to the relay module, press the button, relay is turned on, and NO and COM terminals are connected. Meanwhile, power an LED with a breaboard power module, you should see an LED connected on the breadboard lights up. As shown in the picture below. | For example, we have supplied DC 12V to the relay module, press the button, relay is turned on, and NO and COM terminals are connected. Meanwhile, power an LED with a breaboard power module, you should see an LED connected on the breadboard lights up. As shown in the picture below. | ||
<br>[[File:Ks0317.jpg| | <br>[[File:Ks0317.jpg|600px|frameless|thumb]]<br> | ||
<br> | |||
== Resources == | |||
https://fs.keyestudio.com/KS0317 | |||
== | == Get One Now == | ||
*[https://www.keyestudio.com/keyestudio-button-controlled-one-channel-12v-relay-module-for-arduino-black-and-environmental-friendly-p0356-p0356.html '''Official website''' ] | |||
*[https://www.aliexpress.com/store/product/Keyestudio-Button-Controlled-One-Channel-12V-Relay-Module-For-Arduino-Black-and-Environmental-friendly/1452162_32891694887.html?spm=2114.12010615.8148356.25.52c31761K2S6h3 '''Shop on aliexpress''' ] | |||
[[Category: Module ]] | [[Category: Module ]] | ||
Latest revision as of 08:34, 28 April 2021
Overview
This is a button-controlled relay module. It integrates a 12V relay.
Powered on, you can control the relay on and off through a tactile button on the module.
Or you can connect up the white connector on the module to replace the tactile button, so as to remotely control the relay on and off.
.jpg)
Features
- Onboard comes with a 12V relay
- Control the relay via button or white connector
- With four fixed holes, you can mount it on other devices
- Safe and environmental-friendly
.jpg)
Parameters
- Operating voltage: DC 12V
- Operating current: 30mA
Example Use
Connect DC 12V voltage to DC+ and DC- terminal block on the relay, press down the button, relay is turned on, NO and COM terminals are connected, NC and COM terminals are disconnected.
Press the button again, NO and COM terminal will be disconnected, while NC and COM terminal are connected.
For example, we have supplied DC 12V to the relay module, press the button, relay is turned on, and NO and COM terminals are connected. Meanwhile, power an LED with a breaboard power module, you should see an LED connected on the breadboard lights up. As shown in the picture below.
Resources
https://fs.keyestudio.com/KS0317